We post some inquires form our clients here in order to show you our products are well sold.

But to protect the the privacy of clients, the company or personal info are hidden.

】】】】】】】】】】】】】】

Good day Peter,our existing sheet is 1.5mm thick.

It is my understanding that the thiner the sheet the better the results.

I do want to order your vacuum bag to see how it will work for us.

The finished size should be 206” x 74”

Please do not put any holes in the bag as we will place the holes our self.

I want to be sure that the bag is square in the corners like I see on the internet.

I also want to order 1 case of 40mm green tape and case of 30mm green tape.

Please send me the PI for these items.

I am sorry I did not get back to you sooner as the airline lost my luggage and my computer was inside.

Please be sure to send your bank information so we can wire the money into your account.

**************** will send you a PO# as soon as we see the PI.

Thank you and have a great day.

】】】】】】】】】】】】】】】】

【SHOWCASE OF INQUIRIES】

We post some inquires form our clients here in order to show you our products are well sold.

But to protect the the privacy of clients, the company or personal info are hidden.

Peter Lin, cnc@cncGlass.com,

cnc@cncEVA.com

Whatsapp: 0086 15013829504,

WeChat: WeCan365

www.cncglass.com  www.cnceva.com

We post some inquires form our clients here in order to show you our products are well sold.

But to protect the the privacy of clients, the company or personal info are hidden.

】】】】】】】】】】】】】】

Good morning guys, is it possible that you tell me where you purchased new silicon sheets for the

lami oven.

I contacted Kera and they want ******** Euro per sheet plus shipping.

I remember that **********had told me that you found a place in China, can you tell me who?

How thick is your present sheet, 3mm?

Thanks guys

Thank you and Have a great day!

】】】】】】】】】】】】】】】】

【SHOWCASE OF INQUIRIES】

We post some inquires form our clients here in order to show you our products are well sold.

But to protect the the privacy of clients, the company or personal info are hidden.

Peter Lin, cnc@cncGlass.com,

cnc@cncEVA.com

Whatsapp: 0086 15013829504,

WeChat: WeCan365

www.cncglass.com  www.cnceva.com

CNC02-Continuously-Working Thermal Cutter is available for high point temperature adjustment, 16 sections of temp to set. Peter Lin, cnc@cncGlass.com, cnc@cncEVA.com Whatsapp: 0086 15013829504, WeChat: WeCan365 www.cncGlass.com www.cncEVA.com Differences between CNC02 and CNC01: *CNC02-Continuously-Working Thermal Cutter is designed for continuously working with air cooling system, while CNC01-Intermittently-Working is only for short time working, you need to release the button intermittently for cooling after short time heating in case itself gets too hot. *CNC02-Continuously-Working is able to trim the edges with minimum of smoke and no burned marks. *CNC02-Continuously-Working is lighter ,only 610g, easier to handle, while CNC01 is 950g. *CNC02-Continuously-Working is available for high point temperature adjustment, 16 sections of temp to set. So you don’t need to let the blades going up to 500C degrees each time you use it, you may only set the lower temperature(for example about 300C degrees) only if it’s high enough for you to trim interlayer remains, so you can prolong the life time of the blades, and save cost.

Interlayer hot knife cutting overflowed SGP film remains from laminated glass

CNC02-Continuously-Working Thermal Cutter is available for high point temperature adjustment, 16 sections of temp to set. Peter Lin, cnc@cncGlass.com, cnc@cncEVA.com Whatsapp: 0086 15013829504, WeChat: WeCan365 www.cncGlass.com www.cncEVA.com Differences between CNC02 and CNC01: *CNC02-Continuously-Working Thermal Cutter is designed for continuously working with air cooling system, while CNC01-Intermittently-Working is only for short time working, you need to release the button intermittently for cooling after short time heating in case itself gets too hot. *CNC02-Continuously-Working is able to trim the edges with minimum of smoke and no burned marks. *CNC02-Continuously-Working is lighter ,only 610g, easier to handle, while CNC01 is 950g. *CNC02-Continuously-Working is available for high point temperature adjustment, 16 sections of temp to set. So you don’t need to let the blades going up to 500C degrees each time you use it, you may only set the lower temperature(for example about 300C degrees) only if it’s high enough for you to trim interlayer remains, so you can prolong the life time of the blades, and save cost.

CNC02-Continuously-Working Thermal Cutter
is available for
high point temperature adjustment,
16 sections of temp to set.

Peter Lin, cnc@cncGlass.com,
cnc@cncEVA.com
Whatsapp: 0086 15013829504,
WeChat: WeCan365
www.cncGlass.com www.cncEVA.com

Differences between CNC02 and CNC01:

*CNC02-Continuously-Working Thermal Cutter is designed for continuously working with air cooling system, while CNC01-Intermittently-Working is only for short time working, you need to release the button intermittently for cooling after short time heating in case itself gets too hot.

*CNC02-Continuously-Working is able to trim the edges with minimum of smoke and no burned marks.

*CNC02-Continuously-Working is lighter ,only 610g, easier to handle, while CNC01 is 950g.

*CNC02-Continuously-Working is available for high point temperature adjustment, 16 sections of temp to set. So you don’t need to let the blades going up to 500C degrees each time you use it, you may only set the lower temperature(for example about 300C degrees) only if it’s high enough for you to trim interlayer remains, so you can prolong the life time of the blades, and save cost.

CNC02-Continuously-Working Thermal Cutter
is available for
high point temperature adjustment,
16 sections of temp to set.

Peter Lin, cnc@cncGlass.com,
cnc@cncEVA.com
Whatsapp: 0086 15013829504,
WeChat: WeCan365
www.cncGlass.com www.cncEVA.com

Differences between CNC02 and CNC01:

*CNC02-Continuously-Working Thermal Cutter is designed for continuously working with air cooling system, while CNC01-Intermittently-Working is only for short time working, you need to release the button intermittently for cooling after short time heating in case itself gets too hot.

*CNC02-Continuously-Working is able to trim the edges with minimum of smoke and no burned marks.

*CNC02-Continuously-Working is lighter ,only 610g, easier to handle, while CNC01 is 950g.

*CNC02-Continuously-Working is available for high point temperature adjustment, 16 sections of temp to set. So you don’t need to let the blades going up to 500C degrees each time you use it, you may only set the lower temperature(for example about 300C degrees) only if it’s high enough for you to trim interlayer remains, so you can prolong the life time of the blades, and save cost.

CNC02-Continuously-Working Thermal Cutter
is available for
high point temperature adjustment,
16 sections of temp to set.

Peter Lin, cnc@cncGlass.com,
cnc@cncEVA.com
Whatsapp: 0086 15013829504,
WeChat: WeCan365
www.cncGlass.com www.cncEVA.com

Differences between CNC02 and CNC01:

*CNC02-Continuously-Working Thermal Cutter is designed for continuously working with air cooling system, while CNC01-Intermittently-Working is only for short time working, you need to release the button intermittently for cooling after short time heating in case itself gets too hot.

*CNC02-Continuously-Working is able to trim the edges with minimum of smoke and no burned marks.

*CNC02-Continuously-Working is lighter ,only 610g, easier to handle, while CNC01 is 950g.

*CNC02-Continuously-Working is available for high point temperature adjustment, 16 sections of temp to set. So you don’t need to let the blades going up to 500C degrees each time you use it, you may only set the lower temperature(for example about 300C degrees) only if it’s high enough for you to trim interlayer remains, so you can prolong the life time of the blades, and save cost.