Manufactures' Marketplace of China Safety Glass Lamination Materials EVA PVB SGP - Page 12 of 45

Silicone series Curtain wall series Window & door series Electrical industry

======================================
GLASS MANUFACTURER MAIN PRODUCT
======================================

Product Name: MF881 Two Component Silicone Structural Sealant
Shelves time: 2011-09-05
Views : 81
　　APPLICATION FIELDS:

　　● Two component, neutral cured silicone structural sealant, formulated for structural glazing,

　　secondary sealing of insulating glass units, and the hidden-frame curtain wall.

　　● Excellent adhesion to most building materials such as glass, aluminum alloy, and galvanized-

　　steel, stainless steel etc.

　　● Solvent free, primers are not required.

　　● High elasticity and high modulus.

　　● Excellent resistance to high & low temperature and air aging.

　　TECHNICAL DATA – CHEMICAL CHARACTERISTICS

　SURFACE PREPARATION:

　　GLASS / SPACER – To achieve good adhesion, the glass/ spacer surface must be clean and

　　free of any residue.

　　MIXING INSTRUCTIONS:

　　When using an automatic pump mixer ensure the mixing ratio is correct.

　　The mixing ratio by weight is 12:1.Curing speed can be adjusted (range of A:B=11:1～14:1 by weight, the more Com B, the faster curing time).

　　ATTENTION:

　　1. Do a test on compatibility and adhesive property before using.

　　2. Com B should not contact the air for long time because it will react with water in the air.

　　STORAGE:

　　12 months stored in unopened containers in cool, dry and ventilated places.

　　PACKING:

　　Pump application:

　　Drum Package: Com A 200L/Metal barrel (Inner diameter: 567±2mm)

　　Com B 20L/Plastic barrel (Inner diameter: 285±2mm)

　　Hand application:

　　Barrel Package: Com A 20L/ Plastic barrel (Net weight: 25kg)

　　Com B 310ml/Plastic cartridge(Net Vol.:310ml)

　　TRANSPORT:

　　Non-dangerous, can be transported by train, ship, automobile and plane.

Product Name: MF889 Silicone Weatherproofing Sealant
Shelves time: 2011-09-05
Views : 50

Introduction:

　　One component, neutral cured, high elastic

　　Special for all kinds of curtain walls.

　　Conveniently used in the temperature range of 10～50℃;

　　Excellent resistance to weather aging, low and high temperature, keeping good ability even in the range of -60℃~180℃;

　　Excellent adhesion to most building material without primer

　　Movement capability: ±25﹪.

　　No corrosion to the surface; no pollution to the environment.

　　Purposes:

　　Mainly applied in weatherproofing and waterproofing sealing for glazing curtain walls or aluminum panel curtain walls.

　　Properties:

　　Consistent with standards: GB/T14683, JC/T882 & ASTM C920

　　Methods of Application:

　　1. The surface must be clean, dry and free of any traces of grease or dust.

　　2. It can be used directly in the temperature 10～50℃.

　　3. Masking tape should be used in case of contamination and be got rid of after using.

　　Storage:

　　The shelf life will be 12 months stored in cool, dry and ventilated places below 27℃.

　　Package:

　　Cartridge Package: 300ml/piece, 25pcs/carton

　　Sausage Package: 592ml/piece, 20pcs/carton

　　Transportation:

　　MF889 is non-dangerous, can be transported by train, automobile, ship and plane.

Product Name: Aluminium Spacer for Insulating Glass
Shelves time: 2011-09-05
Views : 143

　　Brief Introduction:

　　1. Roll forming line for aluminum window spacer profiles imported from Germany with the most advanced

　　technology adopted European standard.

　　2. Aluminium strip thickness 0.35mm, EN-AW-3003 H26, mirror,anti-corrosion.

　　3. Unique design profiles, excellent bending property.

　　4. Unique surface treatment, better sealing properties with sealants.

　　5. High-frequency induction welded, continuous welding seam quality monitoring by eddy current system.

　　6. No burr and no deformation after cutting, better for connected.

　　7. Marking LOGO as customer special requirement.

Product Name: MF-DJ910 Hot Applied Butyl Sealant for Insulating Glass
Shelves time: 2011-09-05
Views : 76

Introduction　　APPLICATION FIELDS:

　　● One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for

　　primary sealing of insulating glass units.

　　● It can keep its plastic and sealing properties in a wide temperature range.

　　● Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel. ● Minimum moisture vapour and gas permeation.

　　TECHNICAL DATA – CHEMICAL CHARACTERISTICS

SURFACE PREPARATION:

　　GLASS / SPACER – To achieve good adhesion, the glass/ spacer surface must be clean, dry

　　and free of any residue.

　　APPLICATION INSTRUCTIONS:

　　MF-DJ910 shall be applied at a temperature between 100 ℃ and 150 ℃ using appropriate extruders.

　　STORAGE:

　　24 months stored in cool, dry and ventilated places.

　　PACKING:

　　Paper drum: 7 kg/barrel

　　6 kg/barrel

　　5 kg/barrel

　　2 kg/barrel

　　1 kg/barrel

　　200L/ steel drum

　　TRANSPORT:

　　Non-dangerous, can be transported by train, ship, automobile and plane.

Product Name: MF961 Silicone Electrical Sealant
Shelves time: 2011-09-05
Views : 15

　　MF961 is one component, neutral cure at room temperature, high elasticity silicone sealant. It has excellent flame retardancy, excellent resistance to UV and air aging. Mainly applied in the encapsulation and sealing of solar cell module, photoelectric display, and other electronic products, etc.

　　★ Characteristics:

　　Can be extruded directly at 10℃~50℃; excellent adhesion to glass, ceramic, metal materials.

　　Neutral cure, non-corrosive to the surface.

　　Outstanding resistance to UV and air aging.

　　Excellent resistance to low and high temperature; keeping good ability even in the range of -60℃~200℃.

　　High elasticity; elongation > 400%.

　　Excellent flame retardancy.

　　No pollution to the environment.

　　★ Application Fields:

　　Solar cell module encapsulation and sealing.

　　Photoelectric display encapsulation and sealing.

　　Various electronic products encapsulation and sealing.

　　★ Typical Product Data

Standard: GB/T 528 GB/T 531 GB/T 1692 GB/T 1695 UL 94

　　★ Methods of Application:

　　1. For good adhesion, the surface must be clean and dry without dust. Special materials (such as copper, polycarbonate, polypropylene, polytetrafluoroethylene, etc.) need compatibility test before using to determine the preprocessing method for good adhesive property.

　　2. In case of limited access to air or low humidity, curing time will be extended.

　　3. Masking tape should be used for preventing contamination and be got rid of after sealing.

　　★ Curing Time:

　　Sealant will be cured inwards after surface curing. Within 24h curing depth will be about 2mm~4mm. Curing time will be extended in the deeper inside air-limited part. Low temperature and low humidity will also lead to curing time extension. It is recommended that users should be patient and give enough time for the sealant curing completeness before handling and packaging the bonded parts. The curing time depends on multiple factors, and should be determined by the specific purpose of sealant.

　　★ Restriction:

　　Not applicable in the following circumstances:

　　Any building materials exuding grease, plasticizer or solvent.

　　Sealed areas seclusion from air.

　　Frosted or humid surface.

　　★ Attention:

　　1. In case of contact with eyes, rinse immediately with plenty of water.

　　2. Avoid contacting with skins for a long time.

　　3. Avoid contaminating food, medicine or cosmetics.

　　★ Package:

　　Cartridge Package: 300ml/pc, 25pcs/carton

　　Sausage Package: 592ml/pc, 20pcs/carton

　　★ Storage:

　　The shelf life will be 12 months stored in cool, dry and ventilated places below 27℃.

　　★ Transportation:

　　MF961 is non-dangerous, can be transported by train, automobile, ship and plane.

======================================
GLASS MANUFACTURER PRODUCT LIST
======================================

Silicone series (12)

Curtain wall series (6)

I.G. unit series (1)

Window & door series (2)

Fireproofing series (3)

Polysulfide series (1)

Butyl series (1)

Aluminium spacer (1)

Electrical industry (4)

Automobile industry (1)

Road & bridge sealant (0)

======================================
GLASS MANUFACTURER CONTACT INFO
======================================
Zhengzhou Zhongyuan Applied Technology Research and Development Co.,Ltd

Address: No.26, Yinping Road, Zhengzhou Hi-tech Industrial Development Zone, China

Tel/Fax: +86-371-67991808

E-mail: vinson.gao@cnsealant.com

======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
Zhengzhou Zhongyuan Applied Technology Research and Development Co., Ltd. was founded in 1983, thrived as the first hi-tech company specialized in sealant research, produce, and sale. It was one of the first enterprises engaging in Silicone Structural Sealant production and sale appointed by the National Economic and Trade Committee. The qualified personnel, advanced technology, scientific management and large sales market are all its characteristics.

Since its foundation, the company has undertaken and accomplished many important national research programs, especially “MF-840 Polysulfide Sealant for Insulating Glass”. Since being put into production and accepted by many users as substitute for the imported sealant for its advanced characteristics, MF-840 has been widely applied in various professions, areas and automatic production lines. In 1988, the company started to research Silicone Structural Sealant. Its successful production has infilled the blank of the sealant field and made great contribution to China’s insulating glass profession and building area. In 2009, rollforming Line for Aluminum window spacer profiles imported from Germany with the most advanced technology adopted European standard. Our products can be seen all over the world and the company has passed ISO9001 Quality System Certificate and ISO14001 Environment System Certificate.

So far, we have four series of sealant (over 40 types), which are Silicone Sealant, Polysulfide Sealant and Butyl Sealant. They have passed SGS Certificate and EU standard. The Silicone series have passed the test of Singapore National Lab and America DL Lab. Our quality target is pursuing advanced technique, top quality, high efficiency, great benefit and meeting the customers’ requirements as much as possible.

If you are looking for any glass products in China, or need any help of glass(specially laminated glass, smart glass) in China, just send an email to [ hello@helloglass.com ] , and you will get the answers of what you need in 24 hours. To learn more, please go to www.HelloGlass.com .

See the full gallery on Posterous

Laminated glass equipment Glass edging machine Glass washing machine Glass Drilling Machine Glass bending furnace

======================================
GLASS MANUFACTURER MAIN PRODUCT
======================================

glass washing machine
glass washing machine
    Size(length, width ,height): 4700× 2100 × 1200(mm)
    Weight : 1000kg
    Power :5.7kw
    Thickness of processed glass:3mm-19mm
    Width of washing glass:1800mm
    Minimum of washing glass:100 × 100mm
    Speeds:3-5m/min

glass drilling machine
    Drilling diameters: ￠ 4- ￠ 200mm
     Thickness of processed glass :3-25mm
    Max size of processed glass : 2000 × 2000mm
    Size (length, width ,height): 2500× 2200 × 1750(mm)
    Height of platform:990mm
    Weight : 600kg
    Power :2.4kw
    Voltage / frequency:380v/50Hz

double edgy glass grinding machine

laminated glass furnace
POWER INPUT: 220-380V THREEPHASE ALTERBATING CURRENT
POWER CONSUMPTION: 24 KW / H
MAX PROCESSING GLASS SIZE: Max size (mm): 2440*1830 mm
Max Arch height (mm): 400 mm
Max Thickness (mm): 36 mm
EFFICIENCY: Forming cycle (minute/furnace): 35-60 min
Max processing area (M2 /furnace): 26 M2
OPERATION SYSTEM: PLC, Man machine conversation.
OPERATION PLATEFORM: 2 layers
1) The machinery can produce architecture laminated glass, arc laminated glass, bulletproof glass, patterned glass, solar battery glass and art glass such as: laminated flowers/pictures/ fabric /marble glass and so on. LED laminated glass, privacy glass & switchable glass.

Sincerity to win the trust.
The performance advantages of EVA compared with PVB
1.   Compared with PVB ,EVA surpasses in light stability, hydrophobic property ,water resistance ,resistance to elements and wet fastness. EVA film can bear high temperature and wet weather, with a better acoustical insulation than PVB, making it suitable for high decibel surrounding. It will have a wide promising market.
2.   The bond is strong and lasting, the glass won’t depart from the film when the debris plastic glass break, which could avoid the quality problem and sandwich degumming. The adhesive power of EVA is strength and enduring. When sandwich glass is fractured, the fragments will not break away from the film. The advantage of using EVA is avoidance of interlayer degumming and bubbling problems caused by poor quality of cellophane.
3.   EVA has a cohesive force not only to glass , metal and textile fabric but also to PET/ PVC membrane.
4.   Processing equipment is simple, we can obtain the desired laminated glass just heating under vacuum
5.   The EVA is easy for storage at ordinary temperature , EVA’s surface isn’t sticky and doesn’t need the isolating membrane wrapper.
6.   The EVA is transparent and without mist , the effect is equal to PVB film; Besides it can be applied to the higher transparency requirements directly on the occasion .
7.   The preferred alternative, EVA film simplifies the processing technology and fills the market gap. it will be the market of choice.

J-3-3 type laminated glass equipment
The performance advantages of EVA compared with PVB
1.   Compared with PVB ,EVA surpasses in light stability, hydrophobic property ,water resistance ,resistance to elements and wet fastness. EVA film can bear high temperature and wet weather, with a better acoustical insulation than PVB, making it suitable for high decibel surrounding. It will have a wide promising market.
2.   The bond is strong and lasting, the glass won’t depart from the film when the debris plastic glass break, which could avoid the quality problem and sandwich degumming. The adhesive power of EVA is strength and enduring. When sandwich glass is fractured, the fragments will not break away from the film. The advantage of using EVA is avoidance of interlayer degumming and bubbling problems caused by poor quality of cellophane.
3.   EVA has a cohesive force not only to glass , metal and textile fabric but also to PET/ PVC membrane.
4.   Processing equipment is simple, we can obtain the desired laminated glass just heating under vacuum
5.   The EVA is easy for storage at ordinary temperature , EVA’s surface isn’t sticky and doesn’t need the isolating membrane wrapper.
6.   The EVA is transparent and without mist , the effect is equal to PVB film; Besides it can be applied to the higher transparency requirements directly on the occasion .
7.   The preferred alternative, EVA film simplifies the processing technology and fills the market gap. it will be the market of choice.

J-3-2 type laminated glass equipment
The performance advantages of EVA compared with PVB
1.   Compared with PVB ,EVA surpasses in light stability, hydrophobic property ,water resistance ,resistance to elements and wet fastness. EVA film can bear high temperature and wet weather, with a better acoustical insulation than PVB, making it suitable for high decibel surrounding. It will have a wide promising market.
2.   The bond is strong and lasting, the glass won’t depart from the film when the debris plastic glass break, which could avoid the quality problem and sandwich degumming. The adhesive power of EVA is strength and enduring. When sandwich glass is fractured, the fragments will not break away from the film. The advantage of using EVA is avoidance of interlayer degumming and bubbling problems caused by poor quality of cellophane.
3.   EVA has a cohesive force not only to glass , metal and textile fabric but also to PET/ PVC membrane.
4.   Processing equipment is simple, we can obtain the desired laminated glass just heating under vacuum
5.   The EVA is easy for storage at ordinary temperature , EVA’s surface isn’t sticky and doesn’t need the isolating membrane wrapper.
6.   The EVA is transparent and without mist , the effect is equal to PVB film; Besides it can be applied to the higher transparency requirements directly on the occasion .
7.   The preferred alternative, EVA film simplifies the processing technology and fills the market gap. it will be the market of choice.

J-2-2 type laminated glass equipment
Performance Features
a)     J-2-2 type laminated glass equipment can be used to produce laminated architectural glass，arched and laminated glass，bullet-resisting glass，marble laminated glass，clip flower laminated glass，wire glass，clip cloth laminated glass，closet doors laminated glass，photo laminated glass，solar battery glass，conductive glass etc.
b)     J-2-2 type laminated glass equipment has man-machine conversation function, controlled by computer, all produces could be completed automatically .
c)     The equipment adopt PLC control system, more accurate temperature control, time and temperature can be adjusted according to the different thickness of glass , ensure the final products passing rate more than 99%.
d)     Stable vacuum system can achieve continuous work, improve the work efficiency and ensure high output
e)     We have a patented heating system, using turbo convection heating system. It heats quickly and consume low power, energy consumption is 40% -50% of similar products.
f)        Compared with the high-pressure autoclave, it has small investment, low energy consumption, low cost and simple operation
J-2-2 type laminated glass equipment works with high-pressure autoclave to complete the PVB films arced and laminated glass is the perfect arced and laminated glass and layer equipment.

J-1-3 type laminated glass equipment
Performance Features
a)     J-1-3 type laminated glass equipment can be used to produce laminated architectural glass，arched and laminated glass，bullet-resisting glass，marble laminated glass，clip flower laminated glass，wire glass，clip cloth laminated glass，closet doors laminated glass，photo laminated glass，solar battery glass，conductive glass etc.
b)     J-1-3 type laminated glass equipment has man-machine conversation function, controlled by computer, all produces could be completed automatically .
c)     The equipment adopt PLC control system, more accurate temperature control, time and temperature can be adjusted according to the different thickness of glass , ensure the final products passing rate more than 99%.
d)     Stable vacuum system can achieve continuous work, improve the work efficiency and ensure high output
e)     We have a patented heating system, using turbo convection heating system. It heats quickly and consume low power, energy consumption is 40% -50% of similar products.
f)        Compared with the high-pressure autoclave, it has small investment, low energy consumption, low cost and simple operation
g)     J-1-3 type laminated glass equipment works with high-pressure autoclave to complete the PVB films arced and laminated glass is the perfect arced and laminated glass and layer equipment.

We repay the society with the creation value
Performance Features
a)     J-2-3 type laminated glass equipment can be used to produce laminated architectural glass，arched and laminated glass，bullet-resisting glass，marble laminated glass，clip flower laminated glass，wire glass，clip cloth laminated glass，closet doors laminated glass，photo laminated glass，solar battery glass，conductive glass etc.
b)     J-2-3 type laminated glass equipment has man-machine conversation function, controlled by computer, all produces could be completed automatically .
c)     The equipment adopt PLC control system, more accurate temperature control, time and temperature can be adjusted according to the different thickness of glass , ensure the final products passing rate more than 99%.
d)     Stable vacuum system can achieve continuous work, improve the work efficiency and ensure high output
e)     We have a patented heating system, using turbo convection heating system. It heats quickly and consume low power, energy consumption is 40% -50% of similar products.
f)        Compared with the high-pressure autoclave, it has small investment, low energy consumption, low cost and simple operation
g)     J-2-3 type laminated glass equipment works with high-pressure autoclave to complete the PVB films arced and laminated glass is the perfect arced and laminated glass and layer equipment.

======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
Laminated glass equipment

Glass edging machine

Glass washing machine

Glass Drilling Machine

Glass bending furnace

======================================
GLASS MANUFACTURER CONTACT INFO
======================================
Address： HUIFENG ROAD ,TAOLUO INDUSTRIAL PARK, RIZHAO CITY, SHANDONG CHINA.
Name： KENNY LEE
Fax ： +0086-633-2996019
Tel： +0086-633-2190057

MOB ： +0086-18906332668
E_mail： export@fangdingchina.com
Web： http://www.fangdingchina.com

======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
Rizhao Fangding Glass Machinery Company is located in TaoLuo Industrial Park of RiZhao city，Shandong Province, China. It faces Bridgehead of New Eurisian Continental Bridge—RiZhao Port on the east, and adjacent to LanShan Port on the south， 50-meters away from the highway entrance of Tongsan. It has transport facilities, obvious geographical advantages and pleasant climate.
   Our company was founded on October 11, 2003. It is a high new technical enterprise, which set production, technology, sell and service in one. Our company occupies 20000 square meters, which specialized in exploiting, producing artifactitious equipments of medium and top grade EVA laminated glass.
   Since our company founding, we have done much research and improving work in the field of EVA laminated glass, and accumulated abundant practical experience. We have produced the first-class equipment of laminated glass in China, and established a perfect after-sales service system. Our company can provide a complete production line of laminated glass equipment, which could meet the need of customers.
   The EVA laminated glass which produced by our equipment is the first domestic product that obtain CCC certification.
We sincerely cooperate with you based on the excellent products and perfect service. We can build a bridge of friendship between us with the sincere pursuit and your correct choice. Our company welcome the valued customers with our favorable price and more superior after sales service!

See the full gallery on Posterous

Doubel Edging Machine Round Edging Machine

======================================
GLASS MANUFACTURER MAIN PRODUCT
======================================
LS20 Double Edging Machine(Casting)

LS22 Double Edging Machine

LS22 Double Edging Machine

LS1220 Double Edging Machine

LS24/26 Double Edging Machine

LS16 Double Edging Machine
图6

LS12/10 Double Edging Machine

Double Round edge linear production line

======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
Doubel Edging Machine

Round Edging Machine

======================================
GLASS MANUFACTURER CONTACT INFO
======================================
FOSHAN SHUNDE LEO GLASS MACHINERY CO.,LTD
Add:No.28 Changhong Rd.,Fengxiang Industrial Zone,
Daliang,Shunde District,Foshan,Guangdong
Tel: +86-757-22208933
Fax: +86-757-22208936
P.C:528300
E-mail: info@leomachine.com
Website: www.leomachine.com
HUNAN SANXING LEIYANG LEO GLASS MACHINERY CO.,LTD
ADD：No.1 sanxing road south xieyuan, 2nd Ring east Road ,ningxiang
economic development zone,Changsha city,Hunan Province.
P.C:410600
Tel: +86-731-87896008
Fax: +86-731-87855268
E-mail: info@leomachine.com
Website: www.leomachine.com

======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
Leiyang Machinery Co.,Ltd is a high-tech company specialized in manufacturing and supplying high quality machinery and services for the glass industries, in possession of high-rate administrative and technical personnel devoting to production, development and research of glass deep-processing equipment. It has production experience, powerful technical strength and excellent processing facilities.
       Our main products include glass straight line double edging machine and glass straight line round double edging machine series products. With all kinds of different specifications to meet the personalized requirements of customers.
      Leiyang consistently adhering to the “first person, after work” for the enterprise spirit and the “Integrity is fundamental, Product is character” as the enterprise objective. We at Leiyang have taken “To produce the best double-edging machine of China” as our goal. We are guided by economic theory that calls for” continue creativity and boundless pursuit of excellence”, we aim
to provide our customers with continuously perfected, high-quality products, and dedicated support and service they deserve.
      We sincerely welcome friends from all circles at home and abroad to visit our company, negotiate business and create a brilliant future!

Mechanical Loading up&nbs Full-automatic Lay-up&nbs PVB Film Paver

======================================
GLASS MANUFACTURER MAIN PRODUCT
======================================
Glass Loading Table LW-SPT3725

1.Usage of Mechanical Glass Loading Table

The glass is picked up by mechanical automatic loading table, frequency conversion, and then feeds into the loading section of the washing machine at the same speed.

2.Technical Parameter：

2.1Max glass size: 3700mm*2500mm

2.2Way of turning: mechanical

2.3Transmission speed: 0.6~5.5m/min (frequency conversion)

2.4Tilt angel：95°~105° (changeable)

2.5Power: 6.35KW

2.6Height of transmission roller table: 900mm+20mm

Glass Loading Table LW-SPT6025

1. Structural Features

For this machine, we adopt electrical push rod to tilt and pick up the glass sheet. The walking motor is used for frequency conversion of motor speed and the tilting section is self-locked to ensure the safety of tilting the glass sheet. The PLC control program is regulated through the master control cabinet concentrated by manual or automatic control and displayed on the touch panel.

2.Technical Parameter：

2.1Max glass size: 6000mm*2500mm

2.2Way of turning: mechanical

2.3Transmission speed: 0.6~5.5m/min (frequency conversion)

2.4Tilt angel：95°~105° (changeable)

2.5Power: 14Kw/380V/50Hz

2.6Height of transmission roller table: 940mm+20mm

Scissor-type Walking Suction

Design features:

The suction plate is of strong suction and high resetting accuracy, besides, it can lift and walk steadily, safe is reliable.

Semi-automatic Lay-up Suction

Usage and Technical Parameter

The lay-up section is one of the key parts of the laminated glass production line. It should be installed in the dehumidified, thermostatic and clean room. The positioning, PVB film paving and transmission of laminated glass can be accomplished by this section.

The lay-up section is made up of three separated driving conveyors, that is, positioning conveyor I, positioning conveyor II and transitional conveyor. The whole line is controlled by PLC which features that velocity difference among washing machine, lay-up section and prepress machine could be coordinated. In real production, the speed of lay-up section and prepress machine is slower than that of washing machine, so the whole line doesn’t run at the same speed. If the production line runs at the same speed, only the slowest speed is available. In that case, it will be of low production efficiency, but frequency conversion solves this problem and improves productivity.

Automatic Pre-positioning Conveyor

Design Feature:

Self convergent technology is applied in the automatic pre-positioning machine, which ensures that the glass could be at the given position after cleaning and then picked by the suction plate.

Full Automatic laminated Glass Prodution Line

I Technical Parameters of the Production Line

1.1 Max Glass Size:2440mm×6000mm

1.2 Min Glass Length: 420mm

1.3 Min Glass Width: 300mm

1.4 Glass Thickness: 4~80mm

1.5 The Total Length of the Front Equipments: 36290mm

1.6 The Total Power of the Front Equipments: 166.85Kw

II Composition of the production line

2.1Automatic Mechanical Glass Loading Table

2.2Glass Cleaning &Drying Machine

2.3Automatic Preliminary Positioning Conveyor

2.4Extendable Lay-up Table

2.5Automatic walking suction

2.6Automatic PVB Film Paver

2.7Speed-adjustable Transmission Conveyor

2.8Infrared-heating Preliminary Pressing Machine

2.9Mechanical Tilt Table

2.10Infrared-heating Glass Autoclave

Automatic Walking Suction

Design Feature:

The automatic walking suction lifting frame is suitable for glass bigger than 500X500mm, the vavle used in suction plate is from Germany. Each single sheet glass will be automatically sucked by the suction lifting frame after positioning, the suction plate switching is automatic. The glass laminating with PLC control is finished in lay-up section, the whole process is automatic and with high precision.

PVB Film Paver-Semi automatic Line

Design Feature:

It is operated by hand and with good self locking, simple operation and safety and reliability.

PVB Film Paver-Automatic Line

Design Feature:

We adopt electric drive to pave and roll back the film, and the automatic measurement and cutting appliance for the film paver, which can calculate the required length of the PVB film accurately and cut the film at the same time. The three rolls of film are laid flatly, which is convenient and easy and the film can be changed rapidly and conveniently

Mechanical Tilt Table— LW-DDXP6025

1． Technical Parameters

1.1 Max glass size: 6000mm*2500mm

1.2 Min glass size: 1000mm*1000mm

1.3 Glass thickness: 10~40mm

1.4 Max glass weight: 1200Kg

1.5 Way of turning: mechanical

1.6 Transmission speed: 0.6~5.5m/min (frequency control)

1.7 Conveying type: roller convey

1.8 Tilt angel：75°~85° (changeable)

1.9 Height of roller table: 940mm±20mm

1.10 Power: 5Kw/380V/50Hz

1.11 Outer dimension: 6000mm*2450mm*940mm

1.12 Weight: 4600KG

2． Design Features

2.1 The glass is picked by electric handspike. The motor that controls walking is frequency conversion and the motor that controls tilting is self-locked, which ensures the safety of glass tilting. This machine is controlled by PLC with digital display, either manual operation or automatic operation is finished by the master control cabinet.

Mechanical Tilt Table— LW-DDXP3725

1． Technical Parameters

1.1 Max glass size: 3700mm*2500mm

1.2 Min glass size: 1000mm*1000mm

1.3 Glass thickness: 10~40mm

1.4 Max glass weight: 800Kg

1.5 Way of turning: mechanical

1.6 Transmission speed: 0.6~5.5m/min (frequency control)

1.7 Conveying type: roller convey

1.8 Tilt angel：75°~85° (changeable)

1.9 Height of roller table: 940mm±20mm

1.10 Power: 5Kw/380V/50Hz

1.11 Outer dimension: 3600mm*2450mm*940mm

1.12 Weight: 2300KG

2． Design Features

Autoclave LWDY2860

Technical Parameter

Autoclave LWDY3560

Technical Parameter

======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
Mechanical Loading T

Glass Washing &

Semi-automatic Lay-

up&nbs

Full-automatic Lay-up&nbs

PVB Film Paver

Infrared Preliminary

Mechanical Tilt Tabl

Infrared-heating Autoclav

======================================
GLASS MANUFACTURER CONTACT INFO
======================================
Suizhong Binhai Economic Zone Lewei Science & Technology Development Co., Ltd

Address:No9， Yanshan Road, Suizhong Binhai Economic Zone , Liaoning Province

TEL:+86-429-6331858 6795898

Mobile:13733359626 13933528728

Fax:+86-429-6795898

E-mail:lwkm1127@163.com

website:www.lw-autoclave.com

======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
Lewei Science & Technology Development Co. Ltd. is a High-tech enterprise which specializes in developing and manufacturing Infrared Heating Laminated Glass Production Line. It is the special equipment for the production of laminated glass, safety glass and bullet-proof glass.Our company operates under the management of ISO:9001:2000 system, and has got CE approval.

The whole Automatic Laminated Glass Production Line consists of Mechanical Glass Loading Table, Glass Cleaning & Drying Machine, Automatic Preliminary Positioning Machine, Adjustable Lay-up Table, Automatic Walking suction, Electric PVB Paver, Preliminary Heating & Preliminary Pressing Machine, Tilt Table and Infrared Heating Glass Autoclave. PLC control system is adopted in the whole working process of our equipments, which makes the production line control easily and reliable.

With high efficient energy-saving product and sincere services, Lewei accomplished excellence achievement. The products are well sold in both foreign and domestic markets. The company won favorable comments of more than 80 customers from over 20 provinces in China, and the products are well accepted by customers abroad, namely, Brazil, Macedonia, Kenya, Puerto Rico, India, Iran, Bengal, Thailand, Argentina, Vietnam, Korea and Indonesia.

Facing new challenges and opportunities, the company’s core values are : Technology innovation, energy saving and environment friendly, market oriented, sincere services, fully dedicated to the exploitation of advanced glass processing equipment.

See the full gallery on Posterous

See the full gallery on Posterous

Glass Double edger series Product Glass Variable Miter Series Glass Washer&Drier Series

======================================
GLASS MANUFACTURER MAIN PRODUCT
======================================
L-type glass straight-line double edging production line

1.This line including two sets of straight-line double edgers, one 90°transfer table and one set of galss Washing&Drying machine.
2.It is used for grinding the four parallel straight lines and arrises of the flat glass. Rough grinding, fine grinding, polish, safe coner and washing&drying can be finished at one time.
3.It features in high precision, high efficiency, safety and stable.
4.The machine adopts PLC control system, frequency converter adjust speed, set parameter through man-machine interface.
5.The glass can be finish at one time processed, simple operation and high automatic. It is the best equitment for the mass production of glass for furniture and decoration.

Glass straight-line double edging production line

Glass straight-line double edging production line is made up of two transfer tables、two glass straight-line double edging machines and one straight auto-shift table. 11 spindles working on each side of glass including rough, fine grinding, polishing and chamfering, which give you a very nice performance for the 4 sides of glass sheet at one run. The production line was designed as simple and convenient operation、high precisions、high efficiency、safety and security. It’s a dedicated device for batch processing furniture and architectural glass.

The straight auto-shift table is the most efficient one at home and abroad currently. There are two rotating modes of it. One is high-efficiency rotating directly for small glass while the other is rotating big glass with mechanical arm.

Input transfer table equipped with float universal table and a row of fixed idler wheels which makes it more convenient to locate the glass sheet. Straight auto-shift table will match into double edging machines and double pencil edging machines’ any speed. At the same time this production line also specially configured with barcode scanning and retrieval functions. Different bar and space pattern represent different information，not only can retrieve the size of glass, but also can call up the relevant information, such as customer’s information, orders, delivery time and so on. All of these will be called up when you scan the bar code. Generally speaking, it is a perfect processing line for helping a well organized glass processing factory to be a more efficient one.

Glass straight-line double pencil edging production line

Glass straight-line double pencil edging production line is made up of two transfer tables、two glass straight-line double pencil edging machines and one straight auto-shift table. 4 spindles working on each side of glass including rough, fine grinding and polishing, which give you a very nice pencil finish for the 4 sides of glass sheet at one run. The production line was designed as simple and convenient operation、high precisions、high efficiency、safety and security. It’s a dedicated device for batch processing furniture and industry glass.

Input transfer table equipped with float universal table and a row of fixed idler wheels which makes it more convenient to locate the glass sheet. Straight auto-shift table will match into double edging machines and double pencil edging machines’ any speed. At the same time this production line also specially configured with barcode scanning and retrieval functions. Different bar and space pattern represent different information，not only can retrieve the size of the glass, but also can call up the relevant information, such as customer’s information, orders, delivery time and so on. All of these will be called up when you scan the bar code. Generally speaking, it is a perfect processing line for helping a well organized glass processing factory to be a more efficient one.

U type glass straight-line double edging production line

Brief description

1. This line including two sets of straight-line double edgers, two 90°transfer tables and one set of galss Washing&Drying machine.

2. It is used for grinding the two parallel straight lines and arrises of the flat glass. Rough grinding, fine grinding, polish, safe coner and washing&drying can be finished at one time.

3. The machine adopts PLC control system, frequency converter adjust speed, set parameter through man-machine interface.

4. It features in high precision, high efficiency, safety and stable. It is the best equitment for the mass production of glass for furniture and decoration.

(★This picture shows the successful case in our Sweden customer’s factory.)

YXM1 Glass shape edging machine

YXM1 Glass Shape Edging Machine is suitable for processing the edge of round
shape, oval shape & other irregular shape of glass sheet with various size and
thickness. It can be process the round & oval shape glass semi-automatically.
Adopts the different wheels to processing different shape like semicircular, flat
edge and OG edge etc. Adopt the cup shape wheel and adjust the angle of
motor can be processing the bevel edge.

Technical parameter

1.Processing thickness: 3~40mm

2.Dia: 100~2200mm

3.Max.width of bevel: 35mm

4.Bevel degree: 0°~45°

5. degree of vacuum should be reached: -0.08MPa~-0.1MPa

6. water pressure: 0.1MPa~0.2MPa

7. Air source pressure: 0.6MPA~0.8MPa

8. Rotating speed of working table: 0.3rpm~3rpm

9. Rotating speed of independent turnplate: 0.7rpm~7rpm

10. Min.incurvature radius: R100mm

11. Max.rotating radius: 1500mm

12. Height of working table: 1100mm

13.Weight: 900KG

14.Power: 3.92KW

15.Size: 1100*1100*1800mm

YM1 Glass Inner&External shape edging machine

YM1 inter &external shape edging machine applies to grind and polish for shaping peripheral edge of circular , ellipse and irregular flat glass , and also applies to semi-automatic grinding for circular and elliptical glass . Using different shaping grinding wheels can obtain the half- round, flat or OG edges of glass.

1. Main technology specification:

Environment temperature： 1℃　～ 40℃

Relative air humidity： ≤ 90﹪

Applied vacuum degree scope： -0.05 MPa～-0.1 MPa

Water pressure： 0.1 MPa～0.2 MPa

Air supply pressure： 0.6 MPa～0.8 MPa 68L/min

Glass thickness: 3 mm～40 mm

Glass external diameter： φ100 mm～φ1600 mm

Glass internal diameter： φ150 mm～φ600 mm

Maximum radii of curvature： R75mm

Rotation speed of spindle： 2850r/min

Rotation speed of working table： 0.4 r/min～2.0 r/min

Installation power： 4.2ＫW

Total height of the main machine： 1915 mm

Max rotating radii： 960 mm

Height of working table： 1100 mm

Weight： About 700Kg

ZJ130 Glass Horizontal Drilling Machine

1.General description:

1.1ZJ130 Glass drilling machine is a cold processing machine which is easy to drill holes on sheets of glass and is equipped with upper and lower drilling bit.

1.2An automatic cylinder drives the lower-drill bit while the upper bit is operated by manual.

1.3Holes of different sizes can be achieved with bits of different diameters.

1.4 this machine works efficiently, it has low glass damage and is easy to operate.

II. Technical Parameters

1. Hole Diameter: φ5φ220

2. Glass thickness range: 3 ~20 mm

3. Max. size of Processing glass: 2700×2200mm

4. Height of Working Table: 1000mm

5. Distance between drilling center and back column:1300 mm

6. Hole at drilling axis and drilling bit connection end: taper k=60°, screw hole G1/2

7. size: 750×2200×1700mm(L×W×H)

2200×2500×1700mm (with floating working table)

8. Weight: 1200KG (with floating working table)

9. Voltage: 380V/50Hz

10. Power: 4.95Kw(with air compressor 1.5kw)

LZ25 Glass Vertical Drilling Machine

LZ25 glass vertical drilling machine is controlled by computer. In actual operation,
just put the glass on the transmission belt, input drilling position data, press the
start button, the machine will automatically position itself and finish all drilling
operations, and automatically stop when the work is completed. Featuring high
drilling efficiency and accurate position, suitable for the processing of building
glass and furniture glass.

Main technical parameters:

ZM4 Glass straight-line edging machine

ZM4 Glass straight-line edging machine
The 4-spindle ZM4 suitable for processing straight-line edge & 45°arrises of glass sheet with various size and thickness. Rough grinding, fine grinding of flat edge and rough grinding of arris can be finished at one time. The same thickness of flat glass can be continuously processing.

Technical parameter:

A. Processing glass thickness: 3~25mm
B. Angle of arris: 45°

C. Min.size of glass: 80×80m

D. Processing speed: 1.0~5.0m/min

E. Installed power :9.15KW;

G. Dimension : 5800*1100*2500mm

Working condition:

1.3.1Power:AC380V±10% 3 50HZ±2%

1.3.2 Environments temperature:1~40℃

ZM8 Glass straight-line edging machine

ZM8 Glass straight-line edging machine

1.Brief Introduction:

1.1The ZM8 is suitable for processing straight-line edge & 45°arrises of glass sheet with various size and thickness.

1.2. The main base is made of cast iron.

1.3 production speeds is adjusted by step-less motor.

1.4 Input and output conveyor adopt timing belt which can improve the transmission precision.

1.5 It is easy to operate and has good performance.

2.Operation Condition

2.1 Power supply :AC380V±10% 3φ 50HZ±2%

2.2 Environment Temperature : 1~40℃

2.3 R.H:90%

3.Technical Data& Wheel Layout

A. Processing glass thickness: 3~25mm

B. Angle of arris: 45°

C. Min.size of glass: 80×80mm

D. Processing speed: 0.5~4.5m/min

E. Installed power : 16.73kw ;

F. Dimension : 6.6m×1.4m×2.5m

ZM9 Glass straight-line edging machine

ZM9 Glass straight-line edging machine

1.General description

1.1ZM9 is suitable for processing straight-line edge & 45°arrises of glass sheet with various size and thickness.

1.2 The main base is made of cast iron.

1.3 glass thicknesses is adjusted by a servomotor and showed on a digital display.

1.4. A special design of the in-feed section for controlling the desired amount of glass removal without adjusting each spindle individually.

1.5 Independent felt wheel and the cerium water recirculation system make the flat edge more shining.

1.6Input and output conveyor adopt timing belt which can improve the transmission precision.

1.7 It is easy to operate and has good performance.

1.2 Model Explanation

ZM9 9spindles totally: 5spindles for the straight-line edge (adopt the independent wool felt wheel), 2pieces of spindle for front and back arris each.

1.3 Operation Condition

1.3.1 Power supply :AC380V±10% 3φ 50HZ±2%

1.3.2 Environment :Temperature : 1~40℃

1.3.3 R.H: 90%

1.4.Technical Data

A. Processing glass thickness: 3-25mm

B. Angle of arris: 45°

C. Min.size of glass: 80mm×80mm

D. Processing speed: 0.5~4.5m/min

E. Installed power :19.08KW;

F. Dimension : 7000×1400×2500mm

ZM9B Glass straight-line edging machine

ZM9B GLASS STRAIGHT-LINE EDGING MACHINE
A. General description

1. ZM9B is suitable for processing straight-line edge & 45°arrises on glass.

2. A special design of the in-feed section for controlling the grinding amount of glass without adjusting each spindle individually.

3. Indepent wool felt wheel and the cerium water recirculation system make the flat edge more shining.

4. Motor is placed outside of the processing zone and power( rotation) goes through a high precision transmission unit to the spindle wheels. This design can keep
the motor away form water and make sure its long term performance.

5. Input and output conveyors adopt timing belt which can improve the stability of transmission.

6. Speed is adjusted by frequency inverter; PLC with pneumatic polishing

B.Technical Parameter

1.Min. processing size: 80×80mm

2.Processing thickness: 3-25mm

3.Processing speed: 1.2-6.0(0.8-5.5 variable frequency)m/min

4.Weight: 3800kg

5.Power: 19.08kw

6.Size: 7000mm×1400mm×2500mm

7.Spindle quantity: 9pcs

ZM9W Glass straight-line edging machine

A. General description

1.ZM9W is suitable for processing straight-line edge & 45°arrises on glass.

2.A special design of the in-feed section for controlling the grinding amount of glass without adjusting each spindle individually.

3. Indepent wool felt wheel and the cerium water recirculation system make the flat edge more shining.

4.With ABB spindle motors and the conveyor system running on ball bearing units, this machine has a much stronger loading and delivering capacity, thus it is able to
process mini piece and extremely thick piece with high precision and good water-proofing.

5. Input and output conveyors adopt timing belt which can improve the stability of transmission.

6.Speed is adjusted by frequency inverter; PLC with pneumatic polishing.

B.Technical Parameter

1.Min. processing size: 40×40mm

2.Processing thickness: 3-30mm

3.Processing speed: 0.5-5m/min

4.Weight: 4200kg

5.Power: 19.08kw

6.Size: 7820mm×1400mm×2850mm

7.Spindle quantity: 9pcs

ZM11 Glass straight-line edging machine

I. General description:

1. ZM11 is suitable for processing straight-line edge & 45° arrises on glass. Rough, fine grinding and polishing on glass flat edge and arrises can be finished at one time.

2. A special design of the in-feed section for controlling the grinding amount of glass without adjusting each spindle individually.

3. Input and output conveyors adopt timing belt which can improve the stability of transmission.

4. Speed is adjusted by frequency inverter or stepless speed variator.

5. PLC with pneumatic polishing.

6. 11 spindles totally: 5 for the straight-line edge, 3 for front arris and 3 for back arris.

II. Technical Data

1. Processing glass thickness: 3-25mm

2. Angle of arris: 45 degree

3. Min.size of glass: 80mm*80mm

4. Processing speed: 1.2-6.0m/min(variator), 0.8-5.5m/min (frequency inverter)

5. Installed power 19.08KW

6. Occupation of land: 7m*1.4m*2.5m

ZM9J Glass flat edger& variable miter machine

1. Brief Introduction:

1.1 This machine is able to grind and polish the miter angle on glass, with bottom edge polishing and rear seaming all at the same time.

1.2 The control system uses a Mitsubishi PLC control unit.

1.3 Input and output conveyor adopt timing belt which can improve the transmission precision.

1.4 The processed glass surface is very bright and smooth, approaching the original glass surface.

1.5 The mitering angle is from 0 to 60 degree.

2. Technical Parameter

1 Processing glass thickness: 3~28mm

2 Miter angle: 0°~60°

3 Min size processing glass: 80mm×80mm

4 Processing speed: 0.6~5.8m/min

5 Installation power: 20.3KW

6 Dimension: 7800mm (length) ×1400mm (width) ×2500m (height)

ZM11J Glass flat edger& variable miter machine1

1. Brief Introduction:

1.1 This machine is able to grind and polish the miter angle on glass, with bottom edge polishing and rear seaming all at the same time.

1.2 The control system uses a Mitsubishi PLC control unit.

1.3 Input and output conveyor adopt timing belt which can improve the transmission precision.

1.4 The processed glass surface is very bright and smooth, approaching the original glass surface.

1.5 The mitering angle is from 0 to 60 degree.

2. Technical Parameter

1 Processing glass thickness: 3~25mm

2 Miter angle: 0°~60°

3 Min size processing glass: 80mm×80mm

4 Processing speed: 0.6~5.8m/min

5 Installation power: 23.3KW

6 Dimension: 7.92m (length) ×1.4m (width) ×2.5m (height)

ZM4Yglass straight-line pencil edging machine

1.Brief Introduction

1.1 ZM4Y can process pencil/OG edging edges of different glass thickness with different shape wheels.

1.2 Rough grinding, fine grinding and polishing of the pencil edge can be finished at one time.

1.3 Same thickness of glass sheet can be process continually.

1.4 It is suitable for rough peocessing before tempering and other further processing.

2.Technical Parameter

2.1 Min. processing size:80*80mm

2.2 Processing thickness:3~19mm

2.3 Processing speed:1.2~6.0m/min

2.4 Weight:2000KG

2.5 Power:10.55KW

2.6 Size:5800*1100*2500mm

2.7 Spindle quantity:4pcs

ZM7Y Glass straight-line pencil edging machine

1.Brief Introduction

1.1ZM7Y can process pencil/OG edging edges of different glass thickness with different shape wheels.

1.2Rough grinding, fine grinding and polishing of the pencil edge can be finished at one time.

1.3 Same thickness of glass sheet can be process continually.

1.4The brightness of pencil edge will be close to the original glass after polished.

1.5 this machine is easy to operate and has good performance.

2 working condition

1.2.1powerAC380V±10% 3φ 50HZ±2%

1.2.2 Environment temperature: 1~40℃

1.2.3air relative humidity90%.

3.Technical Parameter & Wheels Disposal

2.1technical parameter

1 processing glass thickness : 3～15mm

2 Min. size processing glass：80mm×800mm

3 Processing speed：0.54～5m/min

4 Installation power：15.93KW

5 dimension：6.6m(length) ×1.1m(width) ×2.5m(height)

ZM11J Glass flat edger& variable miter machine2

1.Brief introduction

1.The processing of arris,bottom edge and miter edge of glass can be finished at one time.

2.Input and output conveyors adopt timing belt which can improve the stability of transmission.

3.The processed glass is as bright as the original.

4.Different options:Digital display , PLC Control.

2. Technical Parameter

1 Processing glass thickness: 3~25mm

2 Miter angle: 0°~60°

3 Min size processing glass: 80mm×80mm

4 Processing speed: 0.6~5.8/min

5 Installation power: 23.3KW

6 dimension: 7.92(length) ×1.4m (width) ×2.5m (height)

XM251 glass straight-line beveling machine

XM251 is suitable for processing bevel & bottom edge of glass sheet with various
size and thickness. The function of digital display processing thickness, angle and
remaining thickness. Brightness of edge as clear as the glass itself after polished.

Operation Condition

1 Power supply :AC380V±10% 3φ 50HZ±2%；

2 Environment Temperature : 1℃~40℃；

3 R.H:＜90%

Technical Data& Wheel Layout
Technical Data

XM351 glass straight-line beveling machine

1. Brief Introduction:
1.1This machine is designed for grinding and polishing a bevel edge, with bottom round edger of glass with different size and thickness.

1.2Rough grinding, fine grinding, polishing of bevel and grinding of bottom edge can be completed in one time.

1.3Processing thickness, angle and remaining thickness appears on digital display.

1.4. The processing speed is adjustable with a step-less motor which offers a wide range of speed selection.

1.4 Input and output conveyor adopt timing belt which can improve the transmission precision.

1.5 The grinding wheels are indirectly connected to the motor by a belt to reduce vibration.

1.6 This machine features high efficiency and precision, stable quality, easy operation and low wear.

2.Technical Parameter

Processing speed (m/min):0.83~4.1

Min. glass size (mm):120*120

Glass Thickness (a):3~19

Remain thickness (b): ≥1.5

Max. bevel width : 40mm

Bevel angle:3~30°

Size of whole machine L×B×H:8250×1250×2550mm

Weight: 4500KG

Power: 22.83KW

XM351A glass straight-line beveling machine

XM351A straight line beveling machine are used for grinding bevel and bottom edge of glass with different size and thickness. Rough grinding, fine grinding, polishing of bevel and grinding of bottom edge can be completed in one time. It is easy to adjust the feeding of motor in the all and the one and beveling angle while glass thickness is being changed. Same thickness of glass sheet can be process continually. The brightness of finished surface will be almost the same as glass itself.

Technical Parameter

Min.processing size: 30*30mm

Processing thickness: 3~19mm

Processing speed: 0.8~4.0m/min

Max.width of bevel: 40mm

Bevel degree: 3°~45°

Weight: 4300kg

Power: 21.0kw

Main body size: 4966*1225*1620mm

XM371 Glass straight line

XM371 Glass straight line beveling machine are used for grinding bevel and bottom edge of glass with different size and thickness. Rough grinding, fine grinding, polishing of bevel and grinding of bottom edge can be completed in one time.Same thickness of glass sheet can be process continually. The brightness of finished surface will be almost the same as glass itself.This machine has 11 spindles. It is adopts directly transmission. all motors using ABB brand.

Technical Parameter

Min.processing size:120*120mm

Processing thickness:3~19mm

Processing speed:0.83~4.1m/min

Max.width of bevel:40mm

Bevel degree:3°~30°

Weight:5500kg

Power:25.21kw

XM363A glass straight-line beveling machine

A. General description

1. Rough grinding, fine grinding, polishing of beveling edge, grinding of bottom edge and front arrise can be completed at one time.

2. The processing speed is adjustable with variator which offers a wide range of speed selection;

3. Input and output conveyors adopt timing belt which can improve the stability of transmission;

4. The grinding wheels are connected to the motors directly, which is convenient to adjust and maintain.

5. Rear beam can be adjusted up and down which is suitable for processing small pieces of glass.

B.Technical Parameter

1.Min. processing size: 25×25mm

2.Processing thickness: 3-19mm

3.Processing speed: 0.83-4.1m/min

4.Max.widh of bevel: 40mm

5.Bevel degree: 3-45°

6.Weight: 5000kg

7.Power: 28kw

8.Size: 8865mm×1250mm×2550mm

9.Spindle quantity: 12pcs

QX12 Glass washer&drier

The processing speed is adjusted by variable motor with horizontal structure ,four pairs of brushers and three pairs of sponge rollers make the performance of machine are reliable. The temperature of hot-air can be set in advance. Different designing meets customers requirements.

2.Technical parameter

Max. size:1100*2000mm

Min. size:100*150mm

Processing thickness:3~15mm

Processing speed:0.7~3.5m/min

Brusher: 4pairs

Sponge roller: 3pairs

Power:8KW

Dimension:3400(L)*1600(W)*1020(H)

Weight:800KG

QX16 Glass washer&drier

The processing speed is adjusted by variable motor with horizontal structure ,four pairs of brushrs and three pairs of sponge rollers make the performance of machine reliable. The temperature of hot-air can be set in advance. Different design meets customers＇ requirements.

2.Technical parameter

Max. size: 1500*2100mm

Min. size: 150*150mm

Processing thickness: 3~15mm

Processing speed: 0.7-3.5m/min

Brusher: 4pairs

Sponge roller: 3pairs

Power: 10KW

Dimension: 4000(L)*2000(W)*1020(H)

Weight:900KG

QX25Glass washer&drier

1.QX25 Washer & Drier adopts horizontal structure and is used for cleaning and drying flat glass.

2.It is made up of 3 pairs of brush.

3.The washing brush are adjusted by electric motor, Digital display.

4.Technical parameter :

Max processing size(width): 2500mm

Min processing size: 350*350mm

Processing thickness: 3~30mm

Weight: 4000KG

Power: 23KW

Dimension: 7300*2860*3200mm

QX26 Glass washer&drier

QX26 Glass washer&drier

1. Brief Introduction:

QX26glass washer & drier adopt horizontal configuration, the flat glass placed on the conveyor roller, passing in-feed section, washing section, drier section, and out-feed section. Glass washing and drying machine is used for cleaning and air-drying of flat glass panes. There are various types available for different glass, float, coating and low-E glass. Washing and drying sections can be elevated or lowered as a whole with PLC. Only in this way will come off satisfactorily.

2. Technical parameter

3. Features:

3.1. The high-powered washer is used primarily with manufacturing facilities for

Automobile safety glass, laminated construction glass, mirror and nickel-plate glass.

3.2. Adopt washing is done with four pair of cylinder brushes. (Two pair of rough & fine brushes.)

3.3. Drying is done with high power blower dryer and is equipped with adjust air knife.

3.4. The air resistant sections of the unit are soundproofed.

3.5. This machines drive roll spinning transmission is achieved by utilizing chain wheel helical gear.

3.6. The face of unit can be lift 450mm vertically, allowing easy inspection and repair.

3.7. The water tank is the unit is equipped with an electric heater to self-adjusting water temperature.

3.8. The section of the unit that comes in contact with water is made of stainless steel to prevent corrosion

SM8 Glass straight-line double edging machine

SM8 is available in processing glass with thickness 3-12mm, which is produced in 8spindles (4 peripheral wheels per side) rough, fine grinding; polishing can be finished at a time. Adopt PLC for controlling. The SM8 are also suitable for small production batches.

Mainly parameter:

Dimension of the whole machine (L*W*H) (mm):3270*3240*1900

Working table height (mm): 850

The Min. area of processing glass (mm2): 150*150

Processing glass width (mm): 150~1500

Processing glass thickness (mm): 3~19

Processing glass Diagonal error (mm):2m*2m≤1

Processing glass parallelism error (mm) ≤0.5/2m

The speed of transmission of processing glass (M/Min): 0.5-4.5M/Min.

(According to the thickness of glass to adjust)

Power (KW): 21.7

Voltage (V): 380

Frequency (Hz): 50

Air pressure (MPA):0.4-0.8

Weight (Kg):3500

SM8Y Glass double pencil edging machine

1.Brief introduction:

SM8Y is available in processing glass with thickness 3-19mm, which is produced in 8spindles (4 peripheral wheels per side) rough, fine grinding; polishing can be finished at a time. Adopt PLC for controlling. The SM8Y are also suitable for small production batches.

2. Technical Parameter

Dimension of the whole machine (L*W*H) (mm):3270*3240*1900

Working table height (mm): 850

The Min. area of processing glass (mm2): 150*150

Processing glass width (mm): 150~1500

Processing glass thickness (mm): 3~19

Processing glass Diagonal error (mm):2m*2m≤1

Processing glass parallelism error (mm) ≤0.5/2m

The speed of transmission of processing glass (M/Min): 0.5-4.5M/Min.

(According to the thickness of glass to adjust)

Power (KW): 21.7

Voltage (V): 380

Frequency (Hz): 50

Air pressure (MPA):0.4~0.8

Weight (Kg):3500

SM20 Glass straight-line double edging machine

1.General description:
SM2025 Glass straight-line double edging machine is suitable for grinding two parallel straight-line edge of flat glass, rough, fine and polishing at one time, its feature of high precision, efficiency and secure .the lathe bed use the double straight-line guide rail and ball-bearings, the drive is smooth and reliable. The product adopts the PLC control, speed control by transducer. Set parameter via the intelligent interface. Finish to work at one time, the operation is easy and convenient.

SM2215/25/30/40 available in different models(from1500mm to 4000mm width),each of which is produced in 22 spindles(11spindles per side with safety corner cutting)

2.Technical parameter

SM2025G Glass straight-line double edging machine

1.This kind of double edging machines belong to No.1 in China (from equipped and design), and with highly automatism. And quality is stable.

2. From the No.1 to No.5 adopt stepping motor to drive. Instead of hand. It will be more precision and stability.

3. The main transmission drove by double servo motor , timing belt to synchronize

4. Adopt one pc of automatic oil pump to lubricating guide rail thread, and two pcs of manual oil pump to lubricating slide board.

5. All plugs adopt aviation plugs, stainless steel water tank, and water circulation system.

6.All spindles motors adopt ABB motors.

7. The side press rollers droved by cylinder.

8.It features in high precision, high efficiency, safety and stable. The machine adopts PLC control system, frequency converter adjust speed, set parameter through
human-machine interface. The glass can be finish at one time processed, simple operation and highly automatic. It is the best equipment for the mass production of
glass for furniture and decoration.

SDM1015 Glass sand belt grinding machine

Glass sand belt grinding machine is specialized in grinding arris of flat glass. Especially suitable for grinding edger before tempering.

I. General description:

SDM1015 is convenient to operate and specialized in grinding arris of flat glass, especially suitable for grinding edge of door or window glass before tempering.

II. Technical Specifications:

1. Installed power: 3.04KW

2. Max size of glass: 1000×1500mm

3. Glass thickness range (mm): 3-25

4. Sand belt（mm）（2pieces）：GXK51 P120 width 80×1360mm

5. Weight: 250KG

6. Dimension (mm): 1300×1100×1400

PS1500 Automatic glass sandblasting machine

1.General description

1.1The machine has full-automatic and manual functions, equipped with 3 automatically guns and 1 manual gun,

1.2 The nozzles of guns are made of special material which can increase using life.

2.Technical parameter

The sandblasting speed is 12~15m2/h.

The min.processing size:300*300mm

The max.processing size:1500*3000mm

The size:1900*1900*2300mm

Power: 3.5KW

Weight: 950KG

======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
Glass Double edger series Product

Glass edger series Product

Glass Variable Miter Series

Glass Beveling Series

Glass Washer&Drier Series

Glass Drilling series

Glass shape edging Series

Glass sandblasting machine

======================================
GLASS MANUFACTURER CONTACT INFO
======================================
GUANGDONG ENKONG MACHINERY CO., LTD.

Xinda Industrial Zone, Sanzhou Lunjiao Str., Shunde Dist., Foshan City, Guangdong, China.

Tel:0086-757-27756688

Fax:0086-757-28636022

Email:sales@enkong.com

Website:http://www.enkong.com

======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
Guangdong ENKONG Machinery Co., Ltd. is specialized in developing, researching and manufacturing of glass machines. More than 20 years of professional research and developing production skills has brought us a series of glass deep-processing machinery to meet the different needs of customers, as a result we earned widespread praise and trust from all the customers.
ENKONG provides series of glass machines such as glass double edging machine/line, glass washing machine, glass edger, pencil (round) edging machine, vertical/horizontal drilling machine, glass beveling machine, glass miter machine, glass shape edging machine, inner & external edging machine, glass sandblasting machine and sand belt grinding machine.
As an innovator of glass machinery, ENKONG will continue to pursue further development from a higher perspective, to set an example to the industry and build up an everlasting

See the full gallery on Posterous

Bilateral edge grinding Linear beveling Linear edge grinding

======================================
GLASS MANUFACTURER MAIN PRODUCT
======================================
GlasslinearbilateraledgegrindingmachineYHSZ2015A/YHSZ2005B

The product detail
YHSZ20A series (20 grinding head medium and small piece of bilateral machine) glass linear bilateral edge grinding machine is a with coarse grinding and fine grinding, polishing once completed bilateral machine. This machine adopts double rail and double the high precision ball screw transmission structure, frequency control of motor speed, synchronous belt transmission, electric control part adopts PLC control, through the interface after set parameters, automatic adjustment. This series of bilateral machine structure is advanced, press the beam getting new practical patent, realize the big belt grinding small glass, using 35 mm wide synchronous belt minimum width processing for 130 mm wide glass, leather belt wide long life, glass transmit smooth, glass parallelism and diagonal high precision, pneumatic polishing, polishing effect; The famous brand and high precision parts, the assembly process is excellent, stable performance, easy operation.

YHSZ20B series (20 grinding head super small piece of bilateral machine) with 20 mm wide synchronous belt, the minimum processing 60 mm wide glass, the largest machining 500 mm wide glass.

YHSZ2015A technology parameters:

A product line project yinhai second line products

Transportation speed 0.5 7 m/min 0.5-6.5 m/min 0.5 5 m/min

The biggest chamfering size 4 mm 4 mm 3 mm

Pour Angle 45 ° 45 ° 45 °

The minimum width processing 130 mm 180 mm 250 mm

The largest machining width 1500 mm 1500 mm 1500 mm

The thickness of the glass 2-32 mm 3-25 mm 3-19 mm

Total power of 48 KW 50 KW 54 KW

Covering an area of 4600 X3250X1300mm 4940 X4400X2100mm 5100 X4600X2300mm

The parallel degree error of + /-0.1 mm/m + /-0.2 mm/m + /-0.5 mm/m

The diagonal error of + /-0.5 mm/m + /-0.7 mm/m degree is obtai mm/m

+ /-0.1 mm thickness positioning error/m + /-0.2 mm/m + /-0.5 mm/m

Chamfering width error of + /-0.2 mm/m + /-0.35 mm/m + /-0.5 mm/m

Width location positioning error + /-0.05 mm/m + /-0.07 mm/m + /-0.2 mm/m

Polishing degree level furniture furniture level—

Side damage phenomenon-have no

Activities 750 mm/edge movement speed min 700 mm/min 600 mm/min

Pneumatic working pressure 0.7 Mpa to 0.7 Mpa to 0.7 Mpa

Height 900 mm 900 mm 900 mm

GlasslinearbevelingmachineYHX361S/YHX261S/YHX371S

The product detail
YHX371S type glass linear hypotenuse edge grinding machine is our latest research and development of products. The machine USES short pitch big roller chain transmission, grinding head motor ABB motor, electric control using PLC, a high degree of automation, pneumatic polishing, polishing, good effect, and by using the synchronous belt conveyor. Front rail can height can be up-down adjustment, processing range, mainly used for grinding the glass of the hypotenuse of the hypotenuse and the variety of combination. The machine has the processing high efficiency and good quality, performance stability, simple operation and low loss characteristics.

The main technical parameters:

YHX371S project

Transportation speed 0.8-4 m/min

The biggest hypotenuse width 50 mm

Adjustable Angle range 3 °-26 °

Minimum processing size 30 × 30 mm

The thickness of the glass 3-15 mm

Total power 25.5 KW

Covering an area of 7600 mmx1200mmx2600mm

The total weight of 5000 kg

Thickness is patent protection

Voice prompt a patent

In and out of the material patent illumination

The electric patent appearance

Electric cabinet practical patent

Grinding head overall was in a patent

Anti-rust process 15

Tapered side plain wheels motor ABB

Customers have archive

3 G service network

Humanization design

GlasslinearbevelingmachineYHX261A/C

The product detail
YHX261A/C glass linear beveling machine used for processing of the hypotenuse of flat glass and bottom edge. The pitch for roller chain, before and after linking piece is using thickening steel plate, and through special process, high hardness, good rigidity, smooth transmission. Variable speed motors, synchronous belt transmission, speed adjustable range, the operation is simple, practical, apply the cost is low. According to the customer request make, can add PLC automatic control and pneumatic polishing function.

Technical parameters:

Project YHX261A YHX261C

Transportation speed 0.8-4 m/min 0.8 to 4 m/min

The biggest 20 mm 35 mm bevel edge width

Adjustable Angle range 3 °-20 ° 3 °-20 °

Minimum processing size 30 × 30 mm 80 x 80 mm

The thickness of the glass 3-12 mm 3-12 mm

Total power of 21 KW 21 KW

Covering an area of 6800 x1300x2530mm 6800 x1300x2530mm

The total weight of 4000 kg 4000 kg

Thickness, there is a patent protection

Voice prompt a patent

In and out of the material has a patent illumination

Electric cabinet appearance, there is a patent

Electric cabinet, there is a practical patent

Grinding head overall was in a patent has

Anti-rust process 15 15

Tapered side plain wheels motor ABB ABB

Customers have archive

3 G service network have

Human nature design have

GlasslinearbevelingmachineYHX261B

The product detail
YHX261B type glass linear beveling machine is our latest research and development of new line beveling machine. It is characteristic of the hypotenuse grinding head can whole page, and former beam can lift the whole new splinting techniques, can be processed to hypotenuse scope. And the traditional former beam or lift technology is derived.a compared, the structure is more simple, stability, grinding accuracy of higher better characteristics. The machine with the current of the latest Chinese and foreign technical advantages, variable speed motor drive, synchronous wheel transmission, shifting smoothly, conveying accurately. The equipment is easy operation, stable performance, tapered side plain wheels the coarse grinding and fine grinding, polishing and the bottom can be a complete processing, according to customer requirements PLC automatic control and the pneumatic polishing function.

Technical parameters:

A product line project yinhai second line products

Transportation speed 0.8-4 m/min 0.8-3.5 m/min 0.7-3.0 m/min

The biggest hypotenuse width 35 mm 30 mm 25 mm

Adjustable Angle range 3 °-26 ° 3 °-20 ° 4-18 °

Minimum processing size 30 × 30 mm 35 × 35 mm 40 x 40 mm

The thickness of the glass 3-15 mm 3-12 mm 3-10 mm

Total power of 23 KW 23 KW 25 KW

Covering an area of 7800 x1300x2530mm 7500 X1250X2500MM 6800 X1200X2400MM

The total weight of 4600 kg 4200 kg 3500 kg

Have no no patent protection thickness

Voice prompt patent has no no

In and out of the material patent illumination has no no

Electric cabinet appearance patent have-no

Electric cabinet practical patent have-no

Grinding head overall was in a patent has-no

Anti-rust process 15 12 8

Tapered side plain wheels motor ABB ABB/ordinary common

Customers have archive-no

3 G service network have-no

Human nature design have-no

GlasslinearedgegrindingmachineYHZ8325/9325/9325A

The product detail
YHZ9325 type glass linear edge grinding machine is suitable for grinding need not size and thickness of the flat glass straight edge and 45 ° chamfering. This product set straight edge coarse grinding and fine grinding, polishing and chamfering process such as the one processing and become, feeding speed is adjusted by stepless speed regulation, adjustable range, shifting smoothly; Can adjust the front rail position change the thickness of the glass processing; Adjusting grinding head motor dragging plate can supply the grinding wheel grinding quantity. This machine has simple operation, high precision, grinding effect is good, high efficiency etc. Polishing USES the import CE3 grinding, polishing flat close to the surface of the glass is bright and clean degree.

Technical parameters:

A product line project yinhai second line products

Transportation speed 0.8-4 m/min 0.8-3.5 m/min 0.7-3.0 m/min

The biggest chamfering size 5 mm 4 mm 3 mm

Pour Angle 45 ° 45 ° 45 °

Minimum dimensions 60 x 60 mm 65 x 65 mm 70 x 70 mm

The thickness of the glass 3-25 mm 3-25 mm 3-19 mm

Total power of 20 KW 20 KW 23 KW

Covering an area of 7300 x1300x2530mm 7000 X1250X2500MM 6500 X1200X2400MM

The total weight of 3400 kg 3200 kg 2800 kg

Have no no patent protection thickness

Voice prompt patent has no no

In and out of the material patent illumination has no no

Electric cabinet appearance patent have-no

Electric cabinet practical patent have-no

Anti-rust process 15 12 8

Electric machine a brand a line/ordinary common

Customers have archive-no

3 G service network have-no

Human nature design have-no

GlasslinearedgegrindingmachineYHZ10325B

The product detail
This machine is suitable for grinding different size and thickness of the flat glass and 45 ° the lower side of the big fall Angle, this product set coarse grinding and fine grinding and polishing process one processing completed. The machine is the main characteristics of double pendulum Angle structure, can be adjusted by a frame Angle in various forms combination, in order to adapt to the different requirements, grinding of different class products. The grinding glass surface finish high, glass processing technology is necessary equipment.

Technical parameters:

A product line project yinhai second line products

Transportation speed 0.8-4 m/min 0.8-3.5 m/min 0.7-3.0 m/min

Put a adjustable Angle 45 ° mm 45 ° mm 43 ° mm

Minimum dimensions 60 x 60 mm 65 x 65 mm 70 x 70 mm

The thickness of the glass 3-25 mm 3-25 mm 3-19 mm

Total power of 23 KW 23 KW 25 KW

Covering an area of 7300 x1300x2530mm 7000 X1250X2500MM 6500 X1200X2400MM

The total weight of 3500 kg 3200 kg 2800 kg

Have no no patent protection thickness

Voice prompt patent has no no

In and out of the material patent illumination has no no

Electric cabinet appearance patent have-no

Electric cabinet practical patent have-no

Anti-rust process 15 12 8

Electric machine a brand a line/ordinary common

Customers have archive-no

3 G service network have-no

Human nature design have-no

GlasswashingmachineYHQ2500H/YHQ2000H

The product detail
YHQ2500H type glass washing machines for 3-30 mm thickness of glass and dry automatic cleaning, particularly suitable for coating, mirrors and glass tempering before cleaning. The input of stainless steel product cistern, rubber roller realize automatic cleaning function. The cleaning system is equipped with high pressure jet, wet glass surface, improve the result of cleaning. The machine has a level 3 cleaning roll type brush, water circulating system, high pressure air cooling air dry etc many function combination collocation and into. Conveying system adopts gear transmission, stable and reliable, and the cleaning section but integral lifting, electric control, easy maintenance, convenient adjustment. Its good cleaning and drying effect is the best choice of glass processing enterprise.

The main technical parameters:

YHQ2500H YHQ2000H model

Glass cleaning maximum size 2500 2000

Cleaning the minimum specifications 350 mm x 350 mm 350 mm x 350 mm

The thickness of the glass processing 3-30 mm 3-30 mm

Can lift the height to 400 mm 400 mm

Total power 27 KW 27 KW

The machine size 7000 mm x 3600 mm x 2500 mm 7000 mm x 3100 mm x 2500 mm

Weight 4000 kg 3500 kg

AbnormityedgegrindingmachineYHM20A

The product detail
YHZK80 type high precision automatic drilling machine, the aircraft used PLC control, according to the requirements and can be adjusted to drill in automatic time and speed, feed adopting gas-liquid two-way transmission technology, drilling high quality, this machine manual and automatic control, especially suitable for mass production process into.

YHM20A abnormity edge grinding machine is suitable for processing a diameter of 250 to 2100 mm range of external abnormity lace processing. Can be equipped with modeling, work out on the shape of the same with glass products. Edge of local shape has flat and round mouth edge, duck, etc. To form a circle, square, oval, wave, the plum flower form. Apply the vacuum negative pressure adsorption in the wheel will glass, mechanical stepless speed motor drive wheel rotation, that can be started processing. Wheel speed can be in wheel rotation speed, smooth speed. This machine can hand control operation, also can through the machine, pneumatic institutions to promote turn arm for automatic processing.

The main technical parameters:

YHM20A

Voltage: 380 V frequency 50 Hz

Power: 4 kw

Wheel speed: 1-3 turns/points

The thickness of the glass: 3-20 mm

The most slalom diameter workpiece: 2000 mm

The grinding circle diameter: 80-600 mm

In grinding circle diameter: 80-450 mm

Shape dimension (long X wide X high) : 1770 x900x1690mm

YHZK80

The hole diameter: 4-100 mm

The thickness of the glass: 3-40 mm

Total weight: 800 kg

Overall size: 1660 mm x 820 mm x 1600 mm

======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
Bilateral edge grinding

Linear beveling

Linear edge grinding

Glass washing

Other glass

======================================
GLASS MANUFACTURER CONTACT INFO
======================================
ZhengWeiMing: 13702487809

Address: guangdong province foshan shun durham road venture teach industrial zone number 7

Phone: 0757-26950738 23629020 23629030

Fax: 0757-26950739 zip code: 528308

E-mail: info@yinhai-machine.com

Glass machinery nets (3 G phone network)

======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
Beijing, shunde district, foshan city, glass machinery Co., LTD, implement the party central committee on machinery manufacturing professional one department

Column decision and deployment, under the guidance of the scientific development concept, the Chinese and foreign researchers with good technology, many years of experience

And the unique innovation ability to grasp the core technology. Gained many national patents. Some of the more fills up the domestic empty

White, recently developed new fifth generation humanized edge grinding machine series, effectively help glass processing enterprises to change the economy

Growth pattern and take a new road to industrialization, and realize the green production. Along with constant development and innovation, and now to send

To become a large exhibition of research and development organization, to facilitate the guidance glass machinery manufacturing enterprise reform and innovation work, has been in

Countries glass machinery manufacturing center–guangdong shun darren teaching, establish subsidiary-yinhai glass machinery Co., LTD.

Beveling Edging Machine Round Edging Machine Inside and outside the circle Internal and external circular

======================================
GLASS MANUFACTURER MAIN PRODUCT
======================================

Product Features：
This machine is a nine-head bevel and bottom grinding machine, it can complete rough grinding and fine grinding in one time, the polished effect is similar to a mirror surface, with accurate ground angles. Control system uses PLC control,automatic,manual conversion.Man-machine interface clearly shows that the glass thickness,width and angle of hypotenuse,and the remaining glass thickness and various parameters,such as proceeing speeds,transmission speed using variable
frequency adjustment.
Chain plates are made of thicker steel plates and the slide gibs are made with a number of special processing techniques with such features as superior abrasion resistance, deformation resistance, and stable operation etc. The motor of the machine has a solid body, high precision, low-power consumption, suitable for beveling and milling processing of large quantities of glass parts.

Main techno logy parameter

Is intended to Glass Machinery Factory take full advantage of the personnel to play the industry expertise, integration of resources, and constantly develop an international leader in products to win customer trust, more famous at home and abroad! After years of efforts, the company has now developed into an independent research and development, design, manufacturing and improve the service system in one of the glass processing equipment companies

Product Features：
This machine is suitable for grinding flat glass, including straight-line bevel and bottom grinding, it can complete bevel edge rough grinding, fine grinding, polishing and bottom grinding at one time; it uses a direct-type grinding motor, which is compact with low noise; less fault; the motor controls the overall oscillation angle of the double screws, with digital display of the thickness, speed andangle of the glass under processing; it also has a front beam lifting function, and it has such good features as advanced structure, high precision, easy operation and wide processing range etc, it is a multi-functional machine dedicated for processing wide bevel edge glass and small pieces of glass.

Main techno logy parameter

Product Features：

This machine is suitable for grinding bevel edges and bottom edges of flat glass in large quantities;the front and rear chain plates are made of thickened steel plates, the machine has such good features as high rigidness, difficult to deformation, wear resistance, smooth transmission, its service life is 2-3 times as that of thepeer products and it can be used for more accurate processing of wide bevels.

Main techno logy parameter

Product Features：
This machine is a nine-head bevel and bottom grinding machine, it can complete rough grinding and fine grinding in one time, the polished effect is similar to a mirror surface, with accurate ground angles. Chain plates are made of thicker steel plates and the slide gibs are made with a number of special processing techniques with such features as superior abrasion resistance, deformation resistance, and stable operation etc. The motor of the machine has a solid body, high precision, low-power consumption, suitable for beveling and milling processing of large quantities of glass parts.

Main techno logy parameter

Product Features：

The machine is suitable for grinding peripheral edge such as pencil,OG flat edge with arrises,and bevel of different shape glassby equipping different kinds of wheels, It used shaping-grinder to be grinded and polished,and carl grind high-accuracy，high-quality glass.It provided withsteplees speed variator regulating the speed of processing.

Main techno logy parameter

Product Features：
The machine is mainly used for grinding bottom edges and large edges of flat glass, its grinding heads are very reasonably distributed, 5 of which are used for grinding bottom edges, 4 for grinding 45-degree sharp edges, it can be used for precisely grinding flat bottom edges and 45-degree sharp edges of glass. The machine has such good features as highly practical, simple operation, low application cost etc.

Main techno logy parameter

Product Features：

ZM9325-45°glass straight edging machine adding multi-level edging function than conventional machine,i.e. edging glass ranging from 45°to 90°degree base line.

Main techno logy parameter

Product Features：

Model Zm8325/ZM9325/ZM10325 is applicable to the grinding edge. bottom edge and pointedness of plate glass of different size thickness. It provides rough and fine gringing and polishing at once. It can be polishing itself .and the edge that has been polished just looks like theorigenal. While adjusting different processing thickness, collate the transmitting system that controled by eletronic before adjusting, and the fore chamfering grinder can be moved synchronically with the fore beam，with advanced structure high precision，easy operation and high working efflciency. It is the necessary tool for glass technology.

Main techno logy parameter

Product Features：

The machine is suitable for grinding two straight-line edges of furniture glass,architecture glass ,and electrical applianceglass and So on ;it has characters of rapid peed ,high brightness .the machine adopts high precision transmission structure with two linear guiding bars and two ball bearing guide screw.It is equipped with PLC system on the electric control part. It fixed superior man-machine interface screen operation system.

Main techno logy parameter

Product Features：

The machine is suitable for gringing insulating glass,laminating glass and some of appliance glass,it has characteristics of rapid speed and operation convenient.The machine adopts high precision transmission structure with two linear guiding bars and two ball bearing guide screw.It is equipped with PLC system on the electric control part.It fixede superior man-machine interface touch screen operation system.

Main techno logy parameter

Product Features：

The machine is used for cleaning and air-drying of flat glass panes.There are various types available for different glass.float.coating. Low-E glass and solar glass with thickness 1-50mm,speed 1-10m/min and maximum width up to 3250mm,washing and drying sections can be elevated or lowered as a whole with digital display.

Main techno logy parameter

Product Features：

ZYZ0222 overlay glass drilling machine uses pneumatic clamping device to load glass, sues upper and lower drill bits to drill holes, the lower drill can goes up automatically, the position and speed can be adjusted. With auto feeding function, the worktable can move up and down pneumatically. The machine can be used for continuous mass production and processing.

Main techno logy parameter

Product Features：

The machine is designed for polymer double-sided coating equipment, conveyor supporting roller glue used, can avoid the surface scratch; film, laminated stick by cylinder free synchronous lifting; clearance height can be adjusted according to the thickness of the workpieces. Has the advantages of simple operation; stable performance effect.

Main techno logy parameter

Product Features：

ZDS series of automatic glass sandblasting machine is the latest improved environmental protection product. Glass sandblasting once completed, sand blasting perfectly homogeneous, automatic sand dust. Drain away the dust with a special water tank filter through liquid gas exchange, to achieve the best effect of dust environmental protection, domestic glass sandblasting is preferred. Sandblasting glass thickness is 3-30mm, with marble, ceramic, stainless steel etc..

Main techno logy parameter

Product Features：

The machine is adopted automatic cleaning and dryness for glass and lens in diverse thickness in horizontal thickness in horizontal transmission with 8 brush pole cleaning and 6 sponge absorbing;strong hot wind dryness system.Automatic-controlled temperature and feeding speed.Specifications of ZYX cleaning machine such as:ZYX500、ZYX800、.ZYX1200、ZYX1600、ZYX2500

Main techno logy parameter

Product Features：

Main techno logy parameter

Product Features：

This equipment is new type of glass deep-processing machine used for sanding all kinds of patterns, text and large area sand-blast on the glass and granite surfaces.

Main techno logy parameter

Product Features：

It is a professional sand blower with mainframe and dust collector．It is able to operate fine glass arts．glass sand-blasting，anaglyptics etc．As well as on the mould，metal and craft works.

Main techno logy parameter

Product Features：

Zk80 high precision automatic drilling machine, this machine uses PLC control for adjustment can be automatically feed the bit up and down the time and speed, feed use of gas-liquid two-way transmission technology, drilling of high quality, the machine manual and automatic Control, particularly suitable for processing into bulk production.

Main techno logy parameter

Product Features：

Suitable for processing batches of latter-sight，mirror,round glass or crystal glass with moulds Can put two pieces of glass on the machine at one time，the grinding wheel processes one by one.

Main techno logy parameter

Product Features：

ZDYM1320 glass shape edging machine is suitable for processing perimeter and bevel edges of round and oval shaped glass. It uses satellite wheel for rotation, the wheel rotation speed can be adjusted during work. This machine can also be used for semi-auto grinding of simple special shaped glass. When grinding peripheral edges, it can use three grinding wheels for coarse and fine grinding and polishing. When grinding bevel edges, it can use a bowl shaped grinding wheel, the grinding head can be tilted back, and the bevel angle can be adjusted for end face grinding.

Main techno logy parameter

Product Features：

Equipped with two motors for driving two sand belts to process glass edges．Manual operation，the arris grinding can be finished swiftly．Suitable for glass doors，widows and the glass before tempering.

Main techno logy parameter

Product Features：

ZY-ZJQZsemi-automatic Glass Cutting Process Line
OPERATING INSTRUCTIONS
Put the glass on the inputting table. press the air bearing key and push the glass onto the semiautomatic cutting table. press the starter on the controlling panel the gear-drive equipment will automatically cut the glass. press the air blowing button after cutting and push the glass through the break table through wheels in order to split the glass(the cylinder mandrift can also split the glass).
CHARACTERISTICS
This glass cutting line is applied to the further processing of toughened glass, insulating glass, building glass, furniture glass and special glass etc. especially for the batch cutting of thick glass2-19mm.we supply customized glass cutting process line with efficiency and high production throughout the process to finish glass inputting, cutting, and breaking. this set of equipment is easy, flexible, and steady to operate, dramatically reducing the intensity of labor and improves work efficiency.

ZY-CNC-2620全自动数控异型切割机
Automatic ZY-CNC-2620 Shapedn Cutting Machine
CHARACTERISTICS
This automatic nc-shaped glass cutting machine cut out any shape of glass with professional graphs soft. it features high accuracy, fast speed, easy operation and wide application. it is applied to the further processing of art glass, optical glass, phone panel and car mirror etc.

Main techno logy parameter

Product Features：

Mosaic Cutting Line
ZY-JQZ-2620 Type Double Interchange Manual Precision Cutting Table

The jqz precision cutting table is suitable for mass cutting of square and rectangular sheets of glass. cutting process is completed by hand. the distance between cutting boxes can be abjusted manually, adjust the space of cutter rack, then push the horizontal and vertical bridge to begin mass cutting. it can equip with blowing and sucion accordingly to requirement. the material of tabletop has blanket, metal, resin, imitation leather, marble etc.
features:
1.high efficiency and easy operation to cut with multiple cutters. if needed ,the cutting box can be increased.
2.self-iubricating cutter holders; easy-to-replace cutter wheel.
3.high precision, long lifespan and attractive appearance.
4.glass thickness: 0.1-19mm max cutting size: 4900×3400mm min cutting size:7×7mm accuracy:≤±.015mm/m

Main techno logy parameter

Product Features：

ZNWM1320 is applied for processing interior＆exterior circular edges,elliptical and uneonventional-shape edging machine with dual modes of manual and pneumatic operations.

Main techno logy parameter

======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
Beveling Edging Machine

Straight-Line Machine

Round Edging Machine

Inside and outside the circle

Internal and external circular

Double Edging Machine

Washing & Drying machine

Abrasive Trimming

Sand Spraying Machine

Laminating machine

Fillet Machine

Drilling Machine

Cutting Process Line

======================================
GLASS MANUFACTURER CONTACT INFO
======================================
Address： Lunjiao Industrial Road (200 meters to the east of State Highway 105), Shunde District, Foshan City, Guangdong Province
P.C： 528308 QQ：294872678
TEL： +86-757-27335268
FAX： +86-757-27335263

Http： www.zhengyi.cc
www.中国正意.中国
E-mail： zhengyiglass@163.com

======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
Foshan Shunde Zhengyi Glass Machinery Co., Ltd is a manufacturer specialized in producing glass deep processing equipment, with rich experience accumulated in twelven years of production, strong technical force, and excellent processing equipment.
The company is located in the center of the beautiful and rich Pearl River Delta, it is only15 kilometers away from Foshan City, 30 kilometers away from Guangzhou, and its transportation is very convenient.At present, the products of the company include: beveling machine series, straight edge machine series, special shape machine series, cleaning machine series, drilling machine series and other glass deep-processing equipment of all kinds of varieties and specifications, it can also specifically design customized products according to the specific requirements of users: Wide beveling machines, ultra-small glass piece edge milling machines, special shape grinding machines and scalloped edge grinding machines and so on. Its products have good quality and reliable performance.
“developing by technology, Integrity and responsibility.” is the company’s business tenet. All of our products are made under this tenet in each procedure, from design, manufacturing, to services. Users’ need is our motive power; customer satisfaction is the best assessment to us, promoting the development of the industry is the social return of Zhengyi Machinery.

See the full gallery on Posterous

Double Edging Machine Glass straight line beveling machine Shaped glass edging & beveling machine

======================================
GLASS MANUFACTURER MAIN PRODUCT
======================================

Technical Specification:

This machine is able to produce wave bevel on flat glass. It can also produce normal bevel.
It adopts Panasonic servomotor and cycloid pinwheel decelerator, the transmission speed is very stable and of high precision, which guarantee the good wave shape.
Control system use Mitsubishi PLC control unit.
The main working parameters are set and displayed through an operator interface.
Spindles are driven by high precision ABB motors.
This machine offers 6 basic waveforms of different wavelength, which can meet the different requirements of the customers.

Spindles: 9 heads.
Type of Wave: 6 kinds (30,36,45,60,90,180)
Speed: 0.3-3m/min
Bevel angle : 0°-15°
Max. bevel width: 25mm
Min. glass size: 150mmX150mm
Glass thickness: 4mm-12mm
Total power: 18KW AC 380V±10%/50Hz±2%
Overall Dimension: 6.5mX1.1mX2.2m
Total weight; 3200Kg

This machine adopt PLC control and operator interface. The Screen shows every detailed parameters of glass. The two conveyor belts are driven by two high precision servo motors. The synchronism of transmitting is very high. The torsion of output keeps the constant. The mobile grinding section moves along linear twin ball bearing guide. The transmission is implemented through twin ball bearing lead screws, which is driven by motor with break.
The raise/drop of upper tracking system and upper arris motors are driven by motors. It can be set automatically according to different glass thickness input.
The polishing wheel is operated by air, which can move forwad/back according to glass position.
This machine use high precision low vibration ABB motor.
This machine adopt timing belts transmission.
The machine equipped a auto lubrication pump, which lubricate the lead screw..
Working speed adjustment through Frequency inverter.

Spindles: 22 heads.

Min. glass width: 260mm

Max. glass width: 4500mm

Glass thickness: 3mm-30mm

Working Speed: 0. 5m-7m/min

Speed of width adjustment 0-1400 mm/min

Total power: 50KW

Working Air pressure 0.15～0.8MPa

Outer dimension 5301×4421×1606 mm

The machine is suitable for grinding and polishing inner & outor edge of shape glass. By changing grinding wheel of different shape, flat edge with arris, pencil edge, bevel edge and OG edge can be processed. The height of spindle can be adjusted easily. The pneumatic cylinder makes it possible that round and simple shape glass can be processed automatically.
This machine has another feature that the grinding spindle can rotate up to 90 degree at vertical plane. It is especially convenient to process the peripheral edge of the bending glass such as washing basin.

Angle of spindle: 0°- 90
Max. bevel width: 40mm
Bevel angle: 0°- 45°
Glass thickness: 3mm-30mm
Glass rotation diameter: 400-1400mm
Min. inner circle diameter: Ø40mm
Rotation speed of glass: 0.5-4.5 r/min
Total power: 2.2KW
Overall Dimension: 1.5mX1.5mX1.6m
Weight: 500Kg

This machine adopt time relay controller and oil buff technology. The centering of drill hole can be positioned by means of mechanical method or laser. Pneumatic clamper grip glass with adjustable pressure. The machine has two working status: manual & automatic. In manual mode, the machine only work one cycle. In automatic mode, the machine works continuously. The machine is featured by its high working efficiency, low glass damage and easy operation.

Diameter of drilling hole: 4-100mm
Glass thickness: 3-30mm
Total Power: 2.2Kw
Drill speed 850r/min, 1400 r/min, 2300 r/min
Max. distance of drill hole center to frame 1000mm
Weight: 850kg
Overall dimension: 1.7mx1mx1.6m

This machine is able to grind / polish bottom edge and different miter edge with 10-50 degree variable angle, with front and back seaming .
Control system use Mitsubishi PLC control unit, Operator’s interface display the angle, miter width and other relevant parameters, all parameters can be changed throught touch panel
Amperometers allow to check the wheel absorption and their functioning.
Spindles are driven by high precision ABB motors.
Conveyors: the machine adopt chainless rolling transmitting system, which consists of three bearings rolling along high precision tempered steel guides, the movement of glass is very stable.
The processed glass surface is very bright and smooth, approaching to the original glass surface. This machine is also featured by wide processing range and easy operation.

Grinding Speed : 0.1-3.8m/min
Miter Angle: 10°-50°
Grinding Depth: 3mm
Max. arris width: 2.5mm
Min.glass Size : 30*30mm*8mm
Glass thickness: 3mm-25mm
Total power: 24.6KW
Overall Dimension: 8.0m*1.2m*2.7m
Total Weight: 5800Kg

This machine has 6 motors which can process glass bottom edge and front arris(0-45 degree), with 2 motors for front seaming and 2 motor for rear seaming.
This machine use BEARING CONVEYOR SYSTEM. It is suitable for small glass (40mmx400mm) and heavy glass(4mx4m) processing.
The machine has a glass thickness protection mechanism. When wrong thickness glass is put in the machine. The machine will stop automatically. This protects the bearings from crushing.
The machine adopt PLC control and operator interface.
The front conveyor movement is motorized. It can be adjusted through electrical button on working panel. The thickness is displayed on the screen. There is also a mechanical readout to show glass thickness.
The working speed can be adjusted via the stepless regulator.
The wheels tank for the variable angle 6 wheels use rotating system.
The processed glass surface is very bright and smooth, approaching to the original glass surface. This machine is also featured by wide processing range and easy operation.

Grinding Speed : 0.4-3.8m/min
Variable Angle: 0°-45°
Grinding Depth: 3mm
Max. arris width: 2.5mm
Min.glass Size : 30*30mm*8mm
Glass thickness: 3mm-25mm
Total power: 20KW
Overall Dimension: 9.0m*1.0m*2.5m
Total Weight: 5000Kg

The machine produce round edge, OG edge, and other profile edge on flat glass.
Front rail can be manually moved in parallel to adapt to different glass thickness.
Working speed is adjustable through speed regulator.
Amperometers allow to check wheel absorption and therefore it’s correct functioning.
When grinding the round edge, the two front seaming wheels can remove arris of glass, which reduce the work of rear peripheral wheels, prolong the peripheral wheel’s life time and increase grinding speed.

Spindles:7
Glass thickness: 3mm-19mm
Grinding Speeding: 0.8m-4m/min
Min.glass width: 80mm
Glass thickness: 3mm-19mm
Grinding Speeding: 0.8m-4m/min
Total Weight: 2500Kg
Total power: 15KW
Base Dimension: 6.6m*1m*2.5m

This machine is designed for grinding/polishing bevel edge, with bottom edge grinding.
This machine adopt PLC control and operator interface (touch panel). The motors can be moved as a group. The parameters can be changed though operator interface. The machine can adjust itself according to the parameter input.
Conveyors use chain transmitting system which consist of anti-friction rubber griping pads with reinforced sheet steel bone. This structure guarantee glass is stably moved. The working precision is high.
Synchronous tooth belt are used in loading and unloading arms to carry glass, which has a stable transportation.
Front rail is driven by motors and move in parallel to adapt to different glass thickness.
Working speed is adjustable by stepless regulator, which offer a wide range of speed selection.
Spindles are driven by high precision ABB motors.
This machine is easy to operate and have a good function.

Spindles: 11 heads.
Speed: 0.75m-3.9m/min
Max. bevel width: 50mm
Bevel angle: 0°-25°
Min. glass size: 100mmX100mm
Glass thickness: 3mm-19mm
Total power: 22.5KW
Total dimension: 7.6mX1.2mX2.6m
Weight: 5000Kg

This machine is designed for grinding/polishing bevel edge, with bottom edge grinding.
Conveyors use short joint & big roller chain transmitting system to transmit glass, the transmission is very smooth..
Synchronous tooth belt are used in loading and unloading arms to carry glass, which has a stable transportation.
Front rail is driven by motors and move in parallel to adapt to different glass thickness.
Working speed is adjustable by stepless regulator, which offer a wide range of speed selection.
Working speed, bevel angel and glass thickness appear on digital display.
Grinding spindles are directly connected with high precision ABB motor.
This machine is featured by high efficiency and precision, stable quality, easy operation and low wear.

The machine performs bottom edge grinding/ polishing on flat glass. This machine can process small glass of 25mmx25mm. The finish of glass is very shining.
Conveyor adopt chainless rolling transmitting system, which consists of three bearings rolling along high precision tempered steel guides, the movement of glass is very stable.
Spindles are driven by high precision motors.
Basement and frame are made of cast iron to ensure stability and solidity
Working speed is adjustable through speed regulator.
Working speed and glass thickness appear on digital display.

Spindles: 10 heads.
working Speed: 0.5m-4m/min
Grinding depth: 3mm
Max. arris width: 2.5mm
Glass thickness: 3mm-25mm
Min. glass Size: 25mmX25mmX8mm
Total Power: 21 kw
Overall Dimension: 7.5mx1.5mx2.3m
Total Weight: 4000kg

This machine is designed for grinding/polishing glass bevel, fine grinding bottom edge of flat glass. The front and back conveyor consist of anti-friction rubber pads which use reinforced sheet steel with strong rigidity as the base, this structure guarantee glass is stably moved and have a very high grinding precision. Transmitting speed can be adjusted by stepless regulator, which offer a wide range of speed selection. This machine is easy to operate and have a good function.

Spindles: 9 heads.
Speed: 0.3m-3m/min
Max. bevel width: 30mm
Min. glass size: 100mmX100mm
Glass thickness: 4mm-15mm
Bevel angle: 0°-15°
Total power: 21 KW (380V 50Hz)
Total dimension: 6.4mX1.1mX2.2m
Weight: 3200Kg

This machine is designed to make bevel on both small glass and big glass. The back conveyor track can be moved up and down according to glass size. For small glass size, the back conveyor track can be moved upward. For big glass size, the back conveyor track can be moved downward, it adopt PLC control and operator interface. The Screen can show glass thickness, bevel angle, bevel width and back track height.
Conveyors use big roller chain transmitting system, glass griping pads has design for working small glass, it is changeable after wear off. This structure guarantee glass is stably moved. The working precision is high.
Use high precision low vibration ABB motor, specially for beveling machine.
Working speed adjustment through speed regulator, manually.

Spindles: 9 heads.10 heads
Speed: 0.3m-3m/min
Max. bevel width: 40mm
Min. glass size: 30mmX30mm
Glass thickness: 4mm-15mm
Bevel angle: 0°-25°/ 0°-45°
Total power: 21 KW (380V 50Hz)
Total dimension: 6.7mX1.1mX2.2m
Weight: 5000Kg

This machine adopt PLC control and operator interface. The Screen shows every detailed parameters of glass.
The two conveyor belts are driven by two high precision servo motors. The synchronism of transmitting is very high. The torsion of output keeps the constant.
The mobile grinding section moves along linear twin ball bearing guide. The transmission is implemented through twin ball bearing lead screws, which is driven by motor with break.
The raise/drop of upper tracking system and upper arris motors are driven by motors. It can be set automatically according to different glass thickness input.
The polishing wheel is operated by air, which can move forwad/back according to glass position.
This machine use high precision low vibration ABB motor.
This machine adopt timing belts transmission.
The machine equipped a auto lubrication pump, which lubricate the lead screw..
Working speed adjustment through Frequency inverter.

Spindles: 22 heads.
Min. glass width: 260mm
Max. glass width: 4500mm
Glass thickness: 3mm-30mm
Working Speed: 0. 5m-7m/min
Speed of width adjustment 0-1400 mm/min
Total power: 50KW
Working Air pressure 0.15～0.8MPa
Outer dimension 5301×4421×1606 mm

The machine performs bottom edge grinding/ polishing on flat glass, with arris grinding.
Conveyor adopt chainless rolling transmitting system, which consists of three bearings rolling along high precision tempered steel guides, the movement of glass is very stable.
Control system adopt Mitsubishi PLC control unit, which has automatic and manual control functions,
The main working parameters are set and displayed through an operator interface.
Working speed is electronically adjustable.
Amperometers allow to check wheel absorption and therefore it’s correct functioning.
Spindles are driven by high quality ABB motors.

Spindles: 9 heads.
working Speed: 0.1m-3.8m/min
Grinding depth: 3mm
Max. arris width: 2.5mm
Glass thickness: 3mm-30mm
Min. glass Size: 25mmX25mmX8mm
Total Power: 19.85kw
Overall Dimension: 8.0mx1.2mx2.0m
Total Weight: 5700kg

The machine is suitable for grinding and polishing exterior edge of shaped glass. By changing grinding wheel of different shape, flat edge with arris, pencil edge, bevel edge and OG edge can be processed. The height of spindle can be adjusted easily. The pneumatic cylinder makes it possible that round and simple shape glass can be processed automatically.

Motor, stepless regulator, worm gear are installed in the house of the base. Speed is adjusted thought stepless regulator.

Bevel angle: 0°- 15°
Glass thickness: 3mm-30mm
Glass rotation diameter: 100-1300mm
Max. bevel width: 35mm
Rotation speed of working table: 0.2-2.5 r/min
Rotation speed of single suction disk: 1.2-6 r/min
Total power: 2.2KW
Overall dimension: 1.5mX1.5mX1.6m
Weight: 500Kg

This machine perform normal edge polishing, the pneumatic polishing system makes the machine more friendly for operation, the result is more ideal.
This machine use PLC control and touch panel operating system. The machine can run in automatic mode and manual mode
Conveyor use chain transmitting system, each pad contains a bearing which roll along the guide groove.
Working speed is adjustable through speed regulator.

Spindles: 10
Worktable height: 1100mm
Grinding speed: 0.8-4.5m/min, variable frequency adjustment
Voltage: 380V±10%, 50HZ±1HZ.
Installed power: 20kw
Weight: 3200kg、
Processing range:
Grinding depth: 3mm
Max. arris width: 2.5mm

The machine is designed for grinding bottom edge of flat glass, with arris grinding. It is suitable for rough processing before tempering and the other further processing.
Conveyor adopts chain transmitting system consisting of special stretchy rubber pad.
Front rail is driven by motors and move in parallel to adapt to different glass thickness.
Working speed is adjustable through speed regulator.
Working speed and glass thickness appear on digital display.
This machine is featured by compact structure, small base dimension, high speed, stable quality and low price.

Spindles: 4 heads.
working Speed: 0.8m-4m/min
Grinding depth: 3mm
Max. arris width: 2.5mm
Min. glass size: 60mmx60mmx8mm
Glass thickness: 3mm-25mm
Total Power: 11kw
Overall Dimension: 5.8mX1mX1.8m
Total Weight: 1700kg

The machine is designed for grinding/polishing bottom edge of flat glass, with arris grinding.
Conveyor adopts chain transmitting system consisting of special stretchy rubber pad.
Front rail is driven by motors and move in parallel to adapt to different glass thickness.
Working speed is adjustable through speed regulator.
Working speed and glass thickness appear on digital display.
Amperometer allow to check wheel absorption and therefore it’s correct functioning.
Spindles for arris adopt drag plates structure, which is no vibration in working.

Spindles: 9 heads.
working speed: 0.8-4.0m/min
Grinding depth: 3mm
Max. arris width: 2.5mm
Min. glass size: 80mmx80mmx8mm
Glass thickness: 3-25mm
Total power: 18.75kw
Total dimension: 6.9×1.0x2.5m
Total weight: 3100kg

This machine can execute normal bottom edge polishing, it can also make miter edge of 0-45 degree.
This machine use PLC control and touch panel operating system. The machine can run in automatic mode and manual mode.
The four motors can adjust angle from 0 degree to 45 degree for polishing bottom edge and miter edge.
The fine polishing machine use pneumatic system, which has good working effect.

working speed: 0.8-3.8m/min,
Glass thickness: 3-25mm
Miter angle:0- 45°
Front miter removal :8 mm
Min. glass size: 100×100
Overall dimension(L.W.H):6900x1000x2500mm
Weight: 3000kg
Installed power: 18kw

======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
Double Edging Machine

Glass wave beveling machine

Glass straight line beveling machine

Glass edging & mitering machine

Glass straight line edging machine

Glass straight line round grinding machine

Shaped glass edging & beveling machine

Glass drilling machine

glass double heads drilling line

======================================
GLASS MANUFACTURER CONTACT INFO
======================================
Tel :+86 757 23328802

Fax :+86 757 23319778
Address: Dadu industrial zone, Wendeng Road, Chencun Town, Shunde, Foshan City, P.R.C

E-mail: sales@zhong-xing.com

======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
ZXM glass Machinery co.,ltd was found in 2001, Through these years, ZXM has grown into a company owning 160 staff and production capacity of 1000 machine per year. From the foundation of the company, ZXM has been concentrating on developing glass grinding machine, and specially developed 5 series, over 20 different models. The new products are constantly being developed.

Thanks to years of accumulation in glass grinding technology, ZXM has been acknowledged as a professional supplier for glass grinding machine by customer in local and abroad.

In addition to standard products, ZXM Also provide special product design service for customer.

See the full gallery on Posterous

GLASS STRAIGHT LINE BEVELLING MACHINE GLASS STRAIGHT LINE EDGING MACHINE GLASS CUTTING MACHINE

======================================
GLASS MANUFACTURER MAIN PRODUCT
======================================

TG351B
Machine Brief Description
This machine is used for rough and fine grinding and polishing of beveling edge of flat glass as well as the grinding of bottoms. Through a 3-axial automatic controller, PLC and HMI are adopted to control and display, operator can preset the thickness of glass to be processed, the remained thickness after grinding and width of beveling edge. The grinding speed can be changed by stageless transmission.

Major Technical Specification

Processing speed : 0.4m/min-5.0m/min

Bevel angle : 3o-45o

Max. bevel width : 35mm

Min. glass processing size : 60mm×60mm

Glass thickness : 3mm-19mm

Height of worktabler : 810mm

Weight : 5000kg

Electricity : 380V/50Hz

Total power : 21.5KW

Overall dimension : 7810mm×1510.5mm×2235mm

TG371B-B
Machine Brief Description
This machine is used for rough and fine grinding and polishing of bevelling edge of flat glass as well as the grinding of bottoms. It adopts chainless transmit plate to transfer glass, with stable transmission and high grinding precision, The rear transmitting plate is equipped with automatic cleaning device, and can grind rear transmitting plate by itself to keep high precision for a long time. Auto and

manual oil supply system is equipped to guarantee machine working under a good lubrication condition to increase the stability. PLC and HMI are adopted for controll and display, operator can preset the thickness of glass to be processed, the remained thickness after grinding and the width of bevelling edge.

Major Technical Specification

Processing Speed: 0.4m/min-5.0m/min

Bevel angle: 3o-45o

Max.bevel width: 60mm

Min.glass processing size: 25mm X 25mm

Glass thickness: 3mm-19mm

Total power: 27.32kw

Land area: 8.25m X 1.5m

TG361S
Machine Brief Description
This machine is used for rough and fine grinding and polishing of bevelling edge of flat glass as well as grinding of bottom. It adopts chain transmission. Front track can up and down. It can process 50mm bevel, Min. glass processing size is 25mm. The machine is controlled by manual mode, grinding speed can be changed by stageless transmission.
TG361S
Onchick the images can zoom in

Major Technical Specification

Processing Speed: 0.4m/min-5.0m/min

Bevel angle: 5-45o

Max.bevel width: 50mm

Min.glass processing size: 25mm X 25mm

Glass thickness: 5-12mm

Total power: 20.5kw

Overall dimension: 6465mm(length)1049mm(width)1973mm(height)

TGSBM5020B/TGSBM4520B/TGSBM4220B/TGSBM2520B/TGSBM2020B
Machine Brief Description
This machine is suitable for grinding flat glass of different size and thickness. Grinding two parallel edges, front and rear arris can be finished at one travelling. 22 grinding spindles are equipped. It adopts the automatic compensation break mechanism to ensure the shineness of the glass edge surface after being grind. It is suitable for grinding large glass, suitable for large batch of glass and massive scale glass production.

Major Technical Specification

Processing speed: 0.4m/min-5.0m/min

Max. grinding capacity: 6mm

Max. corner grinding capacity: 3mm

Min. glass processing size: 300mm x 300mm

Max. glass processing size: 5000mm 4500mm 4200mm 2500mm 2000mm

Glass thickness: 3—-30mm

Total power: 53.34kw

Weight: 7500kg

TG252E

Machine Brief Description
This machine is suitable for grinding and polishing the flat bottom edge and corner edge of plate galss.The chainless transfer is adopted to ensure stable transfer glass. This machine is controlled by a Mitsubishi PLC, with HMI displaying thickness of glass.

Major Technical Specification

Range of Speed: 0.4m/min-5.0m/min

Glass thickness: 3mm–30mm

Min.glass size: 30mm

Max.glass size 3000mm

Total power: 18.52kw

Land area: 7.56m X 1.35m

TG611Y

Major Technical Specification

Range of Speed: 0.6m/min-3m/min

Max.grinding: 3mm

Glass thickness: 3mm–19mm

Min.glass size: 100mm X 100mm

Max.glass size 3000mm X 3000mm

Total power: 16.9KW

Land area: 6.5m X 1.5m

TG6322D
Machine Brief Description
This machine is used for rough and fine grinding and polishing of the bottom edge, slope of different angle and arris of flat glass. It adopts chainless transmit plate to transfer glass, with stable transmission and high grinding precision. PLC and HMI are adopted for control and display operator, can preset the thickness of glass to be processed, edge slope and processing speed.

Major Technical Specification

Processing speed: 0.4m/min-5.0m/min

Min. glass processing size: 60×60mm

Max. glass processing width: 3000mm

Glass thickness: 3～30mm

Grinding angle: 0～45°

Total power: 30.25kw

Overall dimension: 8300mm×1400mm×2600mm

Weight: 4800kg

TGFX4Machine Brief Description
This line has four stations and four wheel-arms
which can machining four pieces of glass at the
same time. The wheel-arms are driven by buffer
cylinders to make soft contact with glass, all edges are processed automatically.

Major Technical Specification

======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
GLASS STRAIGHT LINE BEVELLING MACHINE

GLASS STRAIGHT LINE DOUBLE EDGING MACHINE

GLASS STRAIGHT LINE EDGING MACHINE

GLASS STRAIGHT LINE ROUND-EDGE GRINDER

GLASS CUTTING MACHINE

GLASS STRAIGHT LINE ANGLE-

CHANGING EDGING MACHINE

REARVIEW MIRROR

PRODUCTION LINE

======================================
GLASS MANUFACTURER CONTACT INFO
======================================

======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
Champion Glass Machinery Co.,Ltd.is a manufacturer of glass straight line edging machine,straight line beveling machine,glass straight line double edging machine and automatic numerical controlled glass cutting machine.The company possess of a group of professional engineers and technicians,as well as skill workers.

“Pursuing not the largest,but the best”is the principle of the management and administration of the company.Guided by this principle,we try our best to provide customers with high-grade products and excellent services.

“Continue improvement,make the best machine in China to satisfy client”is our quality policy.We carry strict management techniques through whole production process.Our company passed through certification ISO9001:2000,and CE certification.

“High Quality and High Level”is the promise of the company throughout its operation,incliuding design,manufacturing,marketing and after sale service.

ISO9001:2000 attestation

The Machining Workshop of Champion
We have a lot of large machines for example planing machines,double-column milling machines,hingh precision grinding machines etc,champion is the exclusive factory in the field of glass grinding in China who has large,middle and compact size of CNC machining centers,With the new process and materials abopted,these advaced equipments guarantee the good stability,reliability and precision of the products.

5000mm CNC machining center
Some precise machining works,for example,for the location dimenslon and hole slze on the angle changing part,machine base and tracks etc are accomplished by this machine.

6000-3000mm milling planer
Machine base,track and vertcalcolumn are processed by 6000-3000mm milling planer to keep good verticality and parallelism.

1500mmCNC machining center
Slide of the track and spindle base are processed by 1500mm CNCmachine center to keep high accuracy.

4500mm slider grinder
The tracks with HRC57 after heat treatment will be finished by slider grinder to keep good straightness and planeness.

850mmCNC machining center
Divetall slide of spindles is processed by 850mm CNCmachining center to keep high degree of accuracy.

CNC lathe
Screw mandrel and shaft are processed by CNC lathe to keep coaxiality and precision

Aluminum Frames Drying Racks Consumable Items

======================================
GLASS MANUFACTURER MAIN PRODUCT
======================================

This machine can achieve preposition on loading conveyor, auto position and printing on machine,

auto unloading on unloading convey, auto drying on drying furnace after connecting them.

◆SIEMENS touch panel interface.
◆Printing motor matched with servo motor or AC motor. ABB motor for

lifting-driven reduction gearbox.
◆SEW reduction gearbox.
◆SMC pneumatic components.
◆MITSUBISHI PLC & frequency converter.
◆OMRON emergency stop switch.
◆Self-locking system,which adjust table in x,y,z direction.
◆Printing stroke is adjustable.
◆Snap-off by hydraulic pressure.

Be capable of printing amorphous glass, PV glass, film, metal board etc.

◆MITSUBISHI PLC & frequency converter.
◆Printing motor matched with servo motor or AC motor. ABB motor for

lifting-driven reduction gearbox.
◆SEW reduction gearbox.
◆SMC pneumatic components.
◆OMRON emergency stop switch.
◆Self-locking system,which adjust table in x,y,z direction.
◆Printing stroke is adjustable.
◆Snap-off by hydraulic pressure.

Be capable of printing glass, acrylic,metal,wood board etc.

Such as appliance glass, decorative glass, PVC/PC/PE/PET/PMMA,LGP etc.

◆MITSUBISHI PLC & frequency converter.
◆Printing motor matched with servo motor or AC motor. ABB motor for

Be capable of printing circuit board, photoelectric industry, such as electric instruments, film switch, touch panel, LCD panel, FPC, LGP, labels for porcelain，packing paper etc.

◆MITSUBISHI PLC & frequency converter.
◆Printing motor matched with servo motor or AC motor. ABB motor for

Be capable of printing circuit board etc.

◆Double direction scraping blade, double direction printing.
◆MITSUBISHI PLC & frequency converter.
◆Printing motor matched with servo motor or AC motor. ABB motor for

Be capable of printing flat sheet items. Such as

touch panel, cell phone lens, film panel etc.

◆MITSUBISHI PLC & frequency converter.
◆Printing motor matched with servo motor or AC motor. ABB motor for

lifting-driven reduction gearbox.
◆SEW reduction gearbox.
◆SMC pneumatic components.
◆OMRON emergency stop switch.
◆Printing stroke is adjustable.
◆Vertical Lifting

Character:

1.It is suitable for high precision line and mesh point, high-density mesh line to exposal;
2.Microcumputer contral system and Gemanic direct current dynamo,coating speed smooth and adjustable;
3.Easy to adjust coating area;
4.Convenience to install and operation.Gear-driven system with little noise.

Parameter：

Model：SYA-2

·Very short mixing time compare to tum-table mixer.
·No cleaning of the parts after mixing.
·No dust interruption during mixing.
·Two parts inks, UV inks, Binders,paste emulsions can be mixed very effectively.
·SYA-2 has variable mixing speed control for low viscosity product.
·Pneumatic Clamp System:Safety and Reliable.

Specification：

Character:

1.Can set the time for aspirator and exposure by microcomputer,memory 60 groups of parameter,adjust convenient.
2.There have amassing control function can redeem light, shine uniformity and tranpuilization,light-wave long and tranquilzatiion strong vacuum.
3.The parabola refracted cover can made the refract range high to 80%,quick start style can save energy.

Parameter:

Chracters: power heating increase very rapid, temperature equally, automatic calefactive,even temperature,etc.
Tech-data：

Introduction
　　The Pneumatic Mesh Stretcher is the latest model developed and produced bu YongAn Co.,Ltd. It is characterized not only for its ingenious,practical and elegant appearance,but also for its firm structure, light weight, durability and reliability and has therefore become an un-substituting product in the silk-screen industry.

Operation Theory
　　Models C288A Mesh-Stretcher is composed by four completely same mechanic parts which are connected into a rectangle stretching area.With the chain-drive and trapezium whorl silk-pole-moving structure,the machine operator can easily control the tensile strength of the stretcher by turning the plastic covered handle.
The lamination of the frame and the stretching surface is finished by the moving of the four cylinder, The stroke of the cylinder can be used for varied thickn-ess of frames by adjusting the spiral bolt and therefore guarantee the quality of the silk net.

Mechanic Structure
　　Models C288A Mesh-Stretcher is mainly composed by the following five parts; frame,silk pole moving structure,chain driving ,structure,net collets and the pneumatic system.Each part has its special features; the frame is light and firm; the silk pole moving structure is accurate and has outstanding self-lock function;the chain driving structure is light and reasonably distributed; the net collets are composed with reliable and firm double rocker which is patented by YongAn’s only.Strong clamping force is the main reason to decide the quality of net stretching and our product is right beyond all other products at this point.

Mechanical stretching-mesh machine
Max mesh area: 1650×1650 mm
Min mesh area: 600×600 mm
Max tension: 50N/cm2

YA(YongAn) SERIES MESH-STRETCHER

Introduction
The Pneumatic Mesh Stretcher is the latest model developed and produced by Yong An Co., Ltd. It is characterized not only for its ingenious, practical and elegant appearance, but also for its firm structure, lightweight, durability and reliability and has therefore become an un-substituting product in the silk-screen industry.
Operation Theory
YA Series Mesh-Stretcher is composed by four completely same mechanic parts, which are connected into a rectangle stretching area. With the chain-drive and trapezium whorl silk-pole-moving structure, the machine operator can easily control the tensile strength of the stretcher by turning the plastic covered handle.

The lamination of the frame and the stretching surface is furnished by the moving of the four cylinders. The stroke of the cylinder can be used for varied thickness of frames by adjusting the spiral bolt and therefore guarantee the quality of the silk net.

Mechanic Structure
YA series Mesh-Stretcher is mainly composed by the following five parts: frame, silk pole moving structure, chain driving structure, net collets and the pneumatic system. Each part has its special features: the frame is light and firm; the silk pole moving structure is accurate and has outstanding self-lock function; the chain driving structure is light and reasonably distributed; the net collets are composed with reliable and firm double rocker which is patented by YongAn’s only. Strong clamping force is the main reason to decide the quality of net stretching and our product is right beyond all other products at this point.

Installation Guide
1、 Fix the sliding-parts of axletree on the transom and plug the two ends of slider in the slide-truck, then screw the bolts (Note: Appoint the end without handle-wheel as the left end);
2、 Put the slide-base of cylinders in the slide-tracks with corresponding number inside the transom of mesh-stretcher, then screw the nut;
3、 Push the horse and locked-slider according to their number and order into the slide-tracks which locate in the bottom of the transom of mesh-stretcher, then screw the nut;
4、 Install the four mechanical parts of the mesh-stretcher according to the installation order mentioned above. Join the end of parts 1 with the front of parts 2 by counter-clockwise. Put the left end of parts 2 in the slide-track on the right end of parts 1;
5、 Repeat the step 3 and step 4 and join the parts 3 with parts 4;
6、 Install the four parts together by join the parts1 and 2 with parts 3 and 4,after finished the step above (Slipping the two rows of axletree of the sliding- parts, which locate on No.1 transom of the parts1 and 2 in the slide-tract on the No.4 transom of parts 3 and 4. And slipping the two rows of axletree of the sliding-parts, which locate on No.3 transom of the parts3 and 4 in the slide-tract on the No.2 transom of parts 1 and 2.) ;
7、 After adjusting the size and position, lock the bolt of the sliding parts to fix, and connect the 165 X 2100 aluminum panels by using the M5 bolt at the opening of each transom.
8、 Install the handles as illustrated.
9、 Connect the air pipe and filter.
10、 Set the net collets into the track of the transoms and then the rubber ring of the silk-holder.
You can use the horizontal tester and adjust the level of the machine with the bolts on each stand.

→By using the technology of screen touch PLC.F930GOT of Mitubish FXIN series, the machine achieved the advanced level of international standard. We can improved the equipment through software complication.

→Adopt the technology of SMC and FESTO cylinder proving the accuracy adjustment of coating.

→Adopt the technology MITUBISH s500 transducer, coating speed can adjust 0-120mm/s smoothly to satisfy the demands of coating technics, made the accuracy of coating repeatition<1mm.

→Quality steel-shelves structure and lineal conductor assure the equality of coating when using the coating scraper-shelf.

→Convenient man-machine interface make setting the coating order and time easily for user, also the intelligentized alarming page layout speed the service.

Suitable for high-tech LCD, high precision multi-layer electronic print industry and etc.
Adjustable aluminum frame is specially designed product for those particular functions that general fixed frame can not reach.. It can easily relocate if it happened move. It used in double layer and multi-layer PCB product. We have been accumulating our useful experiences and continuous innovation and improvement for many years. Furthermore, we create the high-tech, high precision printing that can meet the today’s requirements and provide high-quality service.

We specialized in manufacturing a number model of drying-rack, including the large size advertising screen printing, All products are employed with high quality of imported spring, screws and durable foot-wheels. We still manufacture special drying-rack series with 3 fulcrums , some parts can lay heavyweight products (suck as glass and metal piece) up with equal gaps of 2cm , 2.5cm ,3.5cm , 4cm ,5cm s,and other with 8cm gap can lay cases of video-box up.

KIWOFILM DS is used for the production of high-quality solvent resistant stencils .To satisfy the different requirements in screen printing and mesh types IVLFILM DS is available in thicknesses of 18 ,25 ,35 ,50 and 70mm.

1.High Stability could be exert effective with any different mesh;
2.Fast mesh area adjustment won’t be limited by mesh-holders size;
3.Tension control will be balance no matter the spreading size of mesh-area or the strength of tension;
4.The rate of mesh damage is more low than other kinds;
5.Special specification products can be made;

Switzerland Printcolor has various of series that are suitable for different kinds of material such as plastic,nylon,metal etc.Printcolor is famous for its high-precision and leading-Quality in Europe.Furthermore,it possess characteristic with good rayresistant and climate-resistant.Printcolor has excellent cover which can make its products measure with function designed anticipation.So that it is helpful to all printing screen manufactures.

Main series of Printcolor:30 four-color print ink、50 single-component metal print ink、160 double-component metal print ink、86&88 plastic print ink,242 PP print ink,660 nylon print ink,200 PE print ink and 388 joy plastic print ink no heavy metal contained.

Photographic Emulsion UNIFILM 3D-SOLV
UNIFILM 3D- SOLV – pre-sensitized photopolymer emulsion. For thick prints with plastisol and solvent based inks. Short exposure time. Ideal for thick stancils on coarse meshes. Good definition. Easy to reclaim.

UNIFILM 3D – Photographic Emulsion

Product: photopolymer emulsion
Application: For the preparation of thick stencils for the textile and ceramic industries.

Properties:
→High definition: Provides sharp edges that are independent of the fabric structure, even for coarse meshes.

→Extremely short exposure time: Thanks to this new and exclusive photopolymer technology, the exposure time is very short even with thick stencils. With Unifilm 3D, the time required for correct exposure is about ten times shorter than a stencil of the same thickness made with a traditional diazo emulsion.

→High solid content: With almost 55% solids, the amount of water is low. Because of this, there is a low thickness loss during the drying process.

→High viscosity: During the coating operation, the UNIFILM 3D emulsion does not run down or drip, allowing the use of wet on wet coating technique. All the coating is done in one operation, without the need for intermediate drying, coating or laminating steps.

→Not sensitive to heat: unlike emulsions sensitized with diazo, the UNIFILM 3D emulsion can be dried in temperatures up to 140F (60C) without any negative effect on the photographic properties. Fast drying periods are possible due to this property.

→Pre sensitized – pure photopolymer formulation: The emulsion is ready to use. There is no need to add diazo or to wait for the disappearing of the air bubbles generated in the process of sensitization.

→Long print runs: During the coating process the emulsion penetrates in the fabric structure. Compared to capillary films it provides superior mesh adhesion and consequently longer print runs.

→Fast process for the preparation of thick stencils, providing up to 1800m (70 mil) in a single step process. There is no need for several drying cycles nor over laminating capillary films.

→Compared to the competitive products and techniques available, UNIFILM 3D provides the best results with a simple, easy and repeatable process, at a more economical cost.

Characteristics:

======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
Machinery

Aluminum Frames

Drying Racks

Consumable Items

======================================
GLASS MANUFACTURER CONTACT INFO
======================================
Yongan Screen Printing Supplies Co., Ltd.
Address：9th, HaoBoXuan Bldg,shangjiashi, Ronggui, Shunde,Foshan city, Guangdong, China
Tel：0757-28390551 SALES：86-757-28378722
Fax：86-757-28392000
Website：www.topyongan.com
Email：office@topyongan.com SALES: yongan@topyongan.com
Zip Code：528303

======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
Yongan Screen Printing Supplies Co., Ltd established in year 1996.Asthe main members of China
Screen Printing& Graphic Imaging Association (CSGIA) and Specialty Graphic Imaging Association
(SGIA).We are one of the famous manufacturer of screen printing equipments and machine in China.

Yongan Screen Printing Supplies Co., Ltd always pays attention to current status and recent
development of the screen printing industry.Actively adopt international advanced high-tech of screen
printing industry fields.Awarded the ISO9001:2000 International Quality System Certification from SGS
certificate centre since year 2002.Meanwhile in year 2006 awarded the CE certification and TUV
certification.In year 1999 Yongan drafted the standard of screen printing frame.which issued to be screen
printing industry standard by China Screen Printing& Graphic Imaging Association (CSGIA) in year 2004
and authorized to be national standard by Standardization Administration of the People’s Republic of
China in year 2009.
All Yongan Screen Printing manufactured alloy frame .drying rack. mesh-stretching machine. emulsion
coating machine. screen exposure machine. screen dryer and printing machine is not only famous in
China (including Hongkong、Macao and Taiwan),but also popular in North America.Europe .Australia
and Mid-east.While insisting both quality control and after service is the the life of Yongan Screen
Printing Supplies Co., Ltd,we also keeping expanding business chanels and ranges through cooperation
with international enterprises.We try to offer more advanced and favourable screen printing supplies to
overseas and domestic markets.

With the developing of of Yongan Screen Printing Supplies Co., Ltd,Zhongshan Youneed Automatic
Equipment Co., Ltd is founded for machinery exclusive department.Specializing in manufacturing :plan
screen printing machine;precision exposure machine;single&double side emulsion coating
machine.Widely apply to glass.film switch.PCB.ITO .textile and packing industry fields and so on.It is
available to work special specification OEM/ODM orders and automatic machinery lines according
customer’s special requests.
Yongan Screen Printing Supplies Co., Ltd takes up with the development of Chinese Screen Printing
Industry and keeps making contribution to this ascendant field.

See the full gallery on Posterous

See the full gallery on Posterous

See the full gallery on Posterous