High Tear-Resistant Silicone Sheet for Wood Door Laminating

This technical note describes a translucent grey, 3.0 mm high tear-resistant silicone sheet used as a press pad between the press membrane and the door skin in wood door laminating. The grade is specified around tear resistance rather than maximum hardness, so the pad can follow a profile and still survive sharp edges, cut-outs and deep relief cycle after cycle. Declared properties include hardness 40 ±3 Shore A, tensile strength ≥ 8.5 MPa, elongation at break ≥ 800 %, tear strength ≥ 40 N/mm, and heat ageing after 72 hours at 220 °C with at least 85 % retention of tensile strength and elongation. These are declared properties, not a performance guarantee for a particular press, membrane or door construction.

Published by Peter Lin

Contact Peter Lin Mail: cnc@cncGlass.com Whatsapp: 0086 15013829504 http://www.cncglass.com/eva-film/ Super clear eva film Outdoor white eva film series Green tape for laminating, heating resistant Thermal cutter trimming eva glass edges www.cncGlass.com www.cncEva.com www.cncNext.com www.c-n-c.com www.ucolin.com