Skip to content

Manufactures' Marketplace of China Safety Glass Lamination Materials EVA PVB SGP

www.manufacturersM.com

tape for evalam

Posted byPeter Lin July 25, 2016

tapes for evalam evasafe evaforce laminate (1)

tapes for evalam evasafe evaforce laminate (2)

tapes for evalam evasafe evaforce laminate (3)

tapes for evalam evasafe evaforce laminate (4)

tapes for evalam evasafe evaforce laminate (5)

tapes for evalam evasafe evaforce laminate (6)

tapes for evalam evasafe evaforce laminate (7)

tapes for evalam evasafe evaforce laminate (8)

Posted byPeter LinJuly 25, 2016Posted incnc@cncGlass.com EVA film glass interlayer

Published by Peter Lin

Contact Peter Lin Mail: cnc@cncGlass.com Whatsapp: 0086 15013829504 http://www.cncglass.com/eva-film/ Super clear eva film Outdoor white eva film series Green tape for laminating, heating resistant Thermal cutter trimming eva glass edges www.cncGlass.com www.cncEva.com www.cncNext.com www.c-n-c.com www.ucolin.com View more posts

Post navigation

Previous Post Previous post:
Previous Post
Next Post Next post:
Green Tape 30 and 35mm for laminating

cnc@cncGlass.com

Contact Peter Lin
Mail: cnc@cncGlass.com
Whatsapp: 0086 15013829504

http://www.cncglass.com/eva-film/
Super clear eva film
Outdoor white eva film series
Green tape for laminating, heating resistant
Thermal cutter trimming eva glass edges
www.cncGlass.com
www.cncEva.com
www.cncNext.com
www.c-n-c.com
www.ucolin.com

Recent Posts

  • EVA Encapsulant in Photovoltaic Modules: Protection, Optics, and Life November 14, 2026
  • What Distinguishes a Leading Solar EVA Manufacturer November 14, 2026
  • The Role of EVA Film in Solar Module Production November 14, 2026
  • EVA Films Explained: Benefits for Modern Manufacturing November 14, 2026
  • (no title) June 6, 2022
  • SGP Interlayer Made in China, Not Dupont, Not Kuraray, but China original brand June 6, 2022
  • Green Polyester Tape for glass lamination edge masking April 1, 2021
  • to remove excess SGP interlayer remains from laminated glass, heavy duty heat cutter (3) December 12, 2019
  • Reusable Silicone bag for eva sgp glass lamination vacuuming October 23, 2019
  • Reusable Silicone bag for eva sgp glass lamination vacuuming October 23, 2019
  • (no title) February 22, 2019
  • (no title) February 22, 2019
  • CNC02-Continuously-Working Thermal Cutter is available for high point temperature adjustment, 16 sections of temp to set. Peter Lin, cnc@cncGlass.com, cnc@cncEVA.com Whatsapp: 0086 15013829504, WeChat: WeCan365 www.cncGlass.com www.cncEVA.com Differences between CNC02 and CNC01: *CNC02-Continuously-Working Thermal Cutter is designed for continuously working with air cooling system, while CNC01-Intermittently-Working is only for short time working, you need to release the button intermittently for cooling after short time heating in case itself gets too hot. *CNC02-Continuously-Working is able to trim the edges with minimum of smoke and no burned marks. *CNC02-Continuously-Working is lighter ,only 610g, easier to handle, while CNC01 is 950g. *CNC02-Continuously-Working is available for high point temperature adjustment, 16 sections of temp to set. So you don’t need to let the blades going up to 500C degrees each time you use it, you may only set the lower temperature(for example about 300C degrees) only if it’s high enough for you to trim interlayer remains, so you can prolong the life time of the blades, and save cost. December 6, 2018
  • CNC02-Continuously-Working Thermal Cutter is available for high point temperature adjustment, 16 sections of temp to set. Peter Lin, cnc@cncGlass.com, cnc@cncEVA.com Whatsapp: 0086 15013829504, WeChat: WeCan365 www.cncGlass.com www.cncEVA.com Differences between CNC02 and CNC01: *CNC02-Continuously-Working Thermal Cutter is designed for continuously working with air cooling system, while CNC01-Intermittently-Working is only for short time working, you need to release the button intermittently for cooling after short time heating in case itself gets too hot. *CNC02-Continuously-Working is able to trim the edges with minimum of smoke and no burned marks. *CNC02-Continuously-Working is lighter ,only 610g, easier to handle, while CNC01 is 950g. *CNC02-Continuously-Working is available for high point temperature adjustment, 16 sections of temp to set. So you don’t need to let the blades going up to 500C degrees each time you use it, you may only set the lower temperature(for example about 300C degrees) only if it’s high enough for you to trim interlayer remains, so you can prolong the life time of the blades, and save cost. December 6, 2018
  • (no title) December 6, 2018
Manufactures' Marketplace of China Safety Glass Lamination Materials EVA PVB SGP, Proudly powered by WordPress.