Manufactures' Marketplace of China Safety Glass Lamination Materials EVA PVB SGP

www.manufacturersM.com

cnc@cncGlass.com

Search for:

Contact Peter Lin
Mail: cnc@cncGlass.com
Whatsapp: 0086 15013829504

http://www.cncglass.com/eva-film/
Super clear eva film
Outdoor white eva film series
Green tape for laminating, heating resistant
Thermal cutter trimming eva glass edges
www.cncGlass.com
www.cncEva.com
www.cncNext.com
www.c-n-c.com
www.ucolin.com

Recent Posts

(no title) June 6, 2022
SGP Interlayer Made in China, Not Dupont, Not Kuraray, but China original brand June 6, 2022
Green Polyester Tape for glass lamination edge masking April 1, 2021
to remove excess SGP interlayer remains from laminated glass, heavy duty heat cutter (3) December 12, 2019
Reusable Silicone bag for eva sgp glass lamination vacuuming October 23, 2019
Reusable Silicone bag for eva sgp glass lamination vacuuming October 23, 2019
(no title) February 22, 2019
(no title) February 22, 2019
CNC02-Continuously-Working Thermal Cutter is available for high point temperature adjustment, 16 sections of temp to set. Peter Lin, cnc@cncGlass.com, cnc@cncEVA.com Whatsapp: 0086 15013829504, WeChat: WeCan365 www.cncGlass.com www.cncEVA.com Differences between CNC02 and CNC01: *CNC02-Continuously-Working Thermal Cutter is designed for continuously working with air cooling system, while CNC01-Intermittently-Working is only for short time working, you need to release the button intermittently for cooling after short time heating in case itself gets too hot. *CNC02-Continuously-Working is able to trim the edges with minimum of smoke and no burned marks. *CNC02-Continuously-Working is lighter ,only 610g, easier to handle, while CNC01 is 950g. *CNC02-Continuously-Working is available for high point temperature adjustment, 16 sections of temp to set. So you don’t need to let the blades going up to 500C degrees each time you use it, you may only set the lower temperature(for example about 300C degrees) only if it’s high enough for you to trim interlayer remains, so you can prolong the life time of the blades, and save cost. December 6, 2018
CNC02-Continuously-Working Thermal Cutter is available for high point temperature adjustment, 16 sections of temp to set. Peter Lin, cnc@cncGlass.com, cnc@cncEVA.com Whatsapp: 0086 15013829504, WeChat: WeCan365 www.cncGlass.com www.cncEVA.com Differences between CNC02 and CNC01: *CNC02-Continuously-Working Thermal Cutter is designed for continuously working with air cooling system, while CNC01-Intermittently-Working is only for short time working, you need to release the button intermittently for cooling after short time heating in case itself gets too hot. *CNC02-Continuously-Working is able to trim the edges with minimum of smoke and no burned marks. *CNC02-Continuously-Working is lighter ,only 610g, easier to handle, while CNC01 is 950g. *CNC02-Continuously-Working is available for high point temperature adjustment, 16 sections of temp to set. So you don’t need to let the blades going up to 500C degrees each time you use it, you may only set the lower temperature(for example about 300C degrees) only if it’s high enough for you to trim interlayer remains, so you can prolong the life time of the blades, and save cost. December 6, 2018
(no title) December 6, 2018
(no title) December 6, 2018
(no title) December 6, 2018
(no title) September 4, 2018
(no title) September 4, 2018

Manufactures' Marketplace of China Safety Glass Lamination Materials EVA PVB SGP, Proudly powered by WordPress.